741347
4
Zoom out
Zoom in
Previous page
1/72
Next page
4
EN
Avoid overloading.
Turn off the appliance after use by removing the plug from the socket.
Always remove the plug from the socket when filling or cleaning the appliance.
The electrical installation must comply with the applicable national and local regulations.
This appliance is not intended for use by persons (including children) with reduced phys
-
ical, sensory or mental capabilities, or lack of experience and knowledge.
Special safety precautions
Always remove the plug from the socket when filling or cleaning the deep fryer.
The electrical installation must satisfy the applicable national and local regulations.
The Fryer tank and element should be placed in a safe position in your kitchen before
usage due to the hot contents when in use.
To avoid the risk of fire, do not allow the oil level to drop below the L- mark (MIN level).
Always use plenty of oil in the bowl.
Never use old oil as this increases the risk of fire.
• Never have the oil exceed the H - mark (MAX level).
Always clean the appliance and other accessories after each use (-->Cleaning and main
-
tenance)
Danger! Never use old oil, old oil has a reduced flash point and is more prone to surge
boiling which increases the risk of fire and dangerous situations.
Warning! Deep frying moist foods and large quantities at once has an negative influence
on the boiling point of the oil.
Warning! Don’t fry to much food at once, maximum load is approximately 2kg.
Intended use
The appliance is intended for professional use
and can be operated only by qualified personnel.
The appliance is designed only for frying appro-
priate food only such as French fries, etc. Any
other use may lead to damage of the appliance
or personal injury.
Operating the appliance for any other purpose
shall be deemed a misuse of the device. The user
shall be solely liable for improper use of the de-
vice.
Grounding installation
This appliance is classified as protection class I
appliance and must be connected to a protective
ground. Grounding reduces the risk of electric
shock by providing an escape wire for the electric
current. This appliance is equipped with a cord
having a grounding wire with a grounding plug. The
plug must be plugged into an outlet that is properly
installed and grounded.
Preparations before using for the first time
Check to make sure the appliance is undamaged.
In case of any damage, contact your supplier im-
mediately and do NOT use the appliance.
Remove all the packing material and protection
film (if applicable).
Clean the appliance with luke-warm water and
a soft cloth.
Place the appliance on a level and steady surface,
unless mentioned otherwise.
Make sure there is enough clearance around the
appliance for ventilation purposes.
Position the appliance in such a way that the plug
is accessible at all times.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 205907 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 205907 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info