665950
6
Zoom out
Zoom in
Previous page
1/8
Next page
Battery changing
Transmitter batteries:
If you want to change the batteries
only in the transmitter, you must
retrain the transmitter as described in
the Additional Transmitters section
and reset the tunes if necessary.
Other previously trained transmitters
do not have to be retrained.
Changing frequency
If the wireless bell sounds although
you have not activated the
transmitter, there may be a device in
the vicinity that is being operated on
the same frequency.
In such cases, the transmitter and
receiver can be set to a different
frequency.
Remove the batteries from the
transmitter for 10 seconds and then
unplug the receiver from the power
socket in order to ensure that the
saved frequency is deleted from the
memory.
Reinsert the batteries in the
transmitter and plug the receiver
back into the power socket. Then
press the transmitter again in order
to set a new frequency.
Any previously taught additional
transmitters must also be retaught,
as described in the Teach Additional
Transmitters section.
SLOGBD
HR
Rufunterscheidung
Bei Verwendung eines zweiten,
dritten oder vierten Senders können
Sie im Sender durch Einstellung
einer anderen Melodie (siehe Rubrik
Melodieauswahl) eine Rufunter-
scheidung (z.B. Vorder- und
Hintertür, zu pflegende Person usw.)
einstellen.
Gehen Sie bei der Frequenz-
einstellung bitte wie unter der Rubrik
„Erste Inbetriebnahme“ bzw. „weitere
Sender anlernen“ vor.
Verwendung mehrerer Sets auf
unterschiedlichen Frequenzen
Um z. B. einen Funkgong im
Erdgeschoss und im 1. Stock eines
Wohnhauses zu betreiben, benötigen
Sie zwei Sets und nehmen diese
nacheinander wie in Rubrik „Erste
Inbetriebnahme“ in Betrieb.
Durch das Heidemann Kodiersystem
wird das zweite Set automatisch auf
einer separaten Frequenz betrieben
und nicht klingeln, wenn das erste
Set benutzt wird.
Razlikovanje poziva
Ako upotrebljavate dva, tri ili četiri
odašiljača, namještanjem druge
melodije (vidi naslov Odabir melodije)
možete u odašiljaču postaviti
razlikovanje poziva (npr. prednja i
stražnja vrata, poziv osobe koju
njegujete i drugo).
Pri namještanju frekvencije postupajte
kao što je opisano pod naslovom Prvo
puštanje u rad ili Dodjela dodatnih
odašiljača.
Uporaba više kompleta na
različitim frekvencijama
Da biste npr. upotrebljavali zvono u
prizemlju i na prvom katu stambene
kuće, potrebna su vam dva kompleta,
a redom ih pustite ih u rad kao što je
opisano pod naslovom Prvo puštanje u
rad.
Zahvaljujući Heidemannovu sustavu
kodiranja, drugi komplet automatski
radi na zasebnoj frekvenciji i ne zvoni
kada se rabi prvi komplet.
Call identification
If you are using a second, third or
fourth transmitter, you can set call
identification (e.g. front and back
door, people requiring assistance,
etc.) by setting a different tune in the
transmitter (see Tune Selection
section).
Proceed with the frequency setting
as described in the Switching on for
the First Time or Teach Additional
Transmitters sections.
Using a number of sets with
different frequencies
In order, for example, to operate a
wireless bell on the ground floor and
on the 1st floor of a house, two sets
need to be used and these must be
initiated sequentially as described in
the Switching on for the First Time
section.
The Heidemann coding system
automatically operates the second
set on a different frequency so that
it does not ring if the first set is
used.
Razlikovanje zvonjenja
Pri uporabi drugega, tretjega ali
četrtega oddajnika lahko v oddajniku
z nastavitvijo druge melodije (glejte
rubriko Izbiranje melodije) nastavite
razlikovanje zvonjenja (npr. sprednja
in zadnja vrata, negovana oseba itn.).
Pri nastavljanju frekvence ravnajte
tako, kot je opisano v rubriki Prvi
začetek uporabe. oz. Priučevanje
dodatnih oddajnikov.
Uporaba več kompletov na
različnih frekvencah
Za uporabo npr. brezžičnega gonga
v pritličju in v 1. nadstropju
stanovanjske hiše potrebujete dva
kompleta in ju daste v uporabo
zaporedno kot je opisano v rubriki
Prvi začetek uporabe.
S kodirnim sistemom Heidemann
drugi komplet obratuje avtomatsko na
ločeni frekvenci in ne zvoni, kadar se
uporablja prvi komplet.
LED-Betriebsleuchte
Auf der Vorderseite des
Empfängers befindet sich eine
grüne LED-Betriebsleuchte, die
konstant leuchtet, wenn der
Empfänger an die Steckdose
angeschlossen ist.
LED Operation Light
A green LED operation light is
situated on the front of the
receiver. It will be on constantly
when the receiver is connected
to the wall socket.
LED obratovalna lučka
Na sprednji strani sprejemnika
se nahaja zelena LED
obratovalna lučka, ki sveti
konstantno, kadar je sprejemnik
priključen na vtičnico.
LED radna svjetiljka
Na prednjoj strani prijemnika
nalazi se zelena LED radna
svjetiljka koja konstantno svijetli
kada je prijemnik priključen na
utičnicu.
6
5
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Heidemann 70861 - HX Plug-in at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Heidemann 70861 - HX Plug-in in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Heidemann 70861 - HX Plug-in

Heidemann 70861 - HX Plug-in User Manual - German, Dutch, French, Italian - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info