665943
4
Zoom out
Zoom in
Previous page
1/12
Next page
werden. Das Befestigungs-
material (Dübel und Schraube)
ist im Lieferumfang enthalten.
Achten Sie bei der Montage
darauf, dass zwischen Wand und
Empfänger ein Abstand von ca.
3mm gelassen wird, damit das
Gerät locker eingehangen
werden kann.
Montage und Installation des
klangaktiven Konverters
Befestigen Sie den Konverter
immer rechts von der Klangquelle
(Gong etc.) da der Sensor im
Konverter links eingebaut ist.
Lassen Sie zwischen Klangquelle
und Konverter 20 mm Platz.
Beispiele der Installation finden
Sie auch nachfolgend skizziert.
(screw and wall-plug) are
included in delivery. When
mounting the device, please
maintain the distance of 3mm
between wall and receiver so
the device can be hung-up
easily.
Mounting and installing the sonic
converter
Always install the converter to the
right of the sound source (bell,
etc.), because the sensor is built
into the left of the converter.
Leave a space of 20 mm between
the sound source and the
converter. Example installations
are also outlined below.
vijak) je vsebovan v obsegu
dobave. Pri montaži pazite na
to, da se med steno in
sprejemnikom pusti razdalja
pribl. 3 mm, da lahko napravo
enostavno obesite.
Montaža in namestitev zvočno
aktivnega pretvornika
Pretvornik vedno pritrdite desno
od vira zvoka (gong itn.), ker je
senzor vgrajen levo v pretvornik.
Med virom zvoka in pretvornik
pustite 20 mm prostora. Primere
namestitve boste našli tudi
skicirane v nadaljevanju.
(moždanik i vijak) priložen je.
Prilikom montaže pazite na to da
između zida i prijemnika ostavite
udaljenost oko 3 mm kako biste
uređaj mogli labavo objesiti.
Montaža i instalacija pretvarača
sa zvučnom aktivacijom
Pretvar uvijek pričvrstite desn
je senzor ugrađen u pretvar s
lijeve strane. Između izvora
zvuka i pretvarača treba ostaviti
20 mm razmaka. Primjere
instalacije naći ćete skicirane
u nastavku teksta.
SLOGBD
HR
Benutzen Sie zur Befestigung das
mitgelieferte Montagematerial.
Lassen Sie zwischen Konverter
und Wand einen Abstand von
ungefähr 3 mm, so dass Sie den
Konverter mühelos auf- und
abhängen können.
Tipp:
Testen Sie vor der Endmontage
die Funktion und Reichweite.
Wichtig:
Durch montieren des Konverters
auf PVC Türrahmen und/oder Metall-
oberflächen wird die Reichweite
eingeschränkt.
Einstellung der Sensorempfindlichkeit:
Damit der Konverter optimal
funktioniert müssen Sie ihn auf
Ihre Klangquelle einstellen.
Im Batteriefach rechts über
den Batterien befindet sich der
Einstellungsregler für den Sensor.
Drehen Sie diesen mit einem
kleinen Schlitzschraubendreher
nach links bzw. rechts um die
Sensibilität des Sensors
einzustellen.
Nach einigen Tests werden Sie die
für Sie optimale Empfindlichkeit
eingestellt haben.
Use the supplied mounting
fitments for installation. Leave a
gap of approximately 3 mm
between the converter and the
wall, so that you can hang the
converter up and take it down
effortlessly.
Tip:
Test the operation and range
before final mounting.
Important:
The range will be reduced if you
mount the converter on PVC door
frames and/or metallic surfaces.
Setting the sensor sensitivity:
In order that the converter
operates to best effect, you must
match it to your sound source. In
the battery compartment, to the
right above the batteries, is the
setting screw for the sensor. Turn
this to the right or left with a small
screwdriver to adjust the
sensitivity of the sensor. After a
few tests, you will have set the
ideal sensitivity for you.
Za pritrditev uporabite dobavljeni
montažni material. Med
pretvornikom in steno pustite
približno 3 mm razdaljo, tako da
lahko pretvornik brez težav
obesite in snamete.
Nasvet:
Pred dokončno montažo testirajte
delovanje in domet.
Pomembno:
Z montažo pretvornika na vratne
okvirje, izdelane iz PVC-ja in/ali na
kovinske površine, se domet omeji.
Nastavitev občutljivosti oddajnika:
Da pretvornik optimalno deluje,
ga morate nastaviti na vvir
zvoka. V predalčku za bateriji
desno nad baterijama je regulator
za nastavitev senzorja. S
pomočjo majhnega izvijača za
vijake z zarezo ga vrtite v levo oz.
desno, da nastavite občutljivost
senzorja. Po nekaj testih ga boste
nastavili na za vas optimalno
občutljivost.
Za pričvršćivanje koristite
isporučeni montažni materijal.
Između pretvarača i zida ostavite
približno 3 mm razmaka kako
biste pretvarmogli jednostavno
okačiti i skinuti.
Savjet:
Prije konačne montaže provjerite
funkciju i domet.
Važno:
Montirate li pretvarač na okvire
vrata od PVC-a ili metalne
površine, ograničit ćete njegov
domet.
Namještanje osjetljivosti senzora:
Da bi pretvaroptimalno radio,
morate ga postaviti na postojeći
izvor zvuka. U pretincu za
baterije desno iznad baterija
nalazi se regulator za
namještanje senzora. Malim
plosnatim odvijačem zakrenite ga
ulijevo ili udesno kako biste
prilagodili osjetljivost senzora.
Nakon nekoliko provjera trebali
biste postići vama optimalnu
osjetljivost.
AA, LR6
AA, LR6
S
3mm
4
3
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Heidemann 70836 - HX Connect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Heidemann 70836 - HX Connect in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Heidemann 70836 - HX Connect

Heidemann 70836 - HX Connect User Manual - German, Dutch, French, Italian - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info