665911
3
Zoom out
Zoom in
Previous page
1/10
Next page
SLOGBD
HR
Wichtig
Durch Montieren des Senders auf
weichmacherfreie PVC Türrahmen
oder Metalloberflächen wird die
Reichweite eingeschränkt!
Unter einer durchsichtigen
Schutzkappe, auf der Vorderseite
des Senders befindet sich ein
beschriftbares Namensschild.
Melodienauswahl
Der Melodienregler befindet sich
im Sender auf der rechten Seite
über der Batterie und ist mit
einem “S” markiert. Durch ein-
faches drücken auf den Regler
ändert sich die Melodie gemäß
der unten aufgeführten Liste.
Einstellmöglichkeiten:
1. 2 x Ding-Dong
2. Telefonklingeln
3. Zirkusmusik
4. Banjo on my knee
5. Morgen kommt der
Weihnachtsmann
6. Its a small world
7. Hundebellen
8. Westminster
Durch Betätigen des Senders
wird ein Signal an den Empfänger
gesendet. Um den Rufton zu
wiederholen, drücken Sie den
Klingeltaster erneut. Der Rufton
wird nur 1x erfolgen, auch wenn
Sie den Klingeltaster gedrückt
halten.
Important
When mounting the transmitter on
rigid PVC door frames or metal
surfaces the range will be limited!
Below the see-through protective
cap on front of transmitter is a
name plate, which can be labelled.
Selection of Melody
The melody control within the
transmitter is situated on the right
above the battery and is marked
“S”. By pressing the control the
melody changes as listed below.
Adjustment Options
1. 2 x Ding-Dong
2. Telephone ring
3. Circus music
4. Banjo on my knee
5. Morgen kommt der
Weihnachtsmann
6. Its a small world
7. Barking Dog
8. Westminster
By pressing the transmitter a
signal is sent to the receiver. To
repeat the call signal press the
bell push-button again. The call
signal sounds only once, even if
bell push-button is pressed
constantly.
Pomembno
Z montažo oddajnika na vratne
okvirje, izdelane iz PVC-ja brez
mehčal, ali na kovinske površine,
se domet omeji!
Pod prozorno zaščitno folijo na
sprednji strani oddajnika se nahaja
ploščica, na katero se lahko napiše
ime.
Izbiranje melodij
Regulator melodij se nahaja v
oddajniku na desni strani nad
baterijo in je označen s črko "S".
S pritiskom na regulator se
melodija spremeni v skladu s
spodaj navedenim seznamom.
Možnosti nastavitve:
1. 2 x Ding-Dong
2. Zvonjenje telefona
3. Cirkuška glasba
4. Banjo on my knee
5. Jutri pride božiček
6. It’s a small world
7. Pasje lajanje
8. Westminster
S pritiskom na oddajnik se pošlje
signal sprejemniku. Da zvonjenje
ponovite, ponovno pritisnite na
gumb za zvonec. Zvonjenje se
zasliši samo 1x, tudi če gumb za
zvonec držite pritisnjen.
Važno
Montiranjem odašiljača na PVC
okvire vrata bez omekšivača ili
metalne površine ograničuje se
domet!
Pod prozirnom zaštitnom kapom na
prednjoj strani odašiljača nalazi se
natpisna pločica.
Odabir melodije
Regulator melodija nalazi se u
odašiljaču na desnoj strani
iznad baterije i označen je
slovom „S“. Pritiskom na regulator
melodija se mijenja u skladu s
dolje navedenom listom.
Mogućnosti namještanja:
1. 2x ding-dong
2. zvonjenje telefona
3. cirkuska glazba
4. Banjo on my knee
5. Morgen kommt der
Weihnachtsmann
6. It’s a small world
7. lavež psa
8. Westminster
Aktiviranjem odašiljača
prijemniku se šalje signal.
Kako biste ponovili pozivni ton,
iznova pritisnite tipku zvona.
Pozivni ton ponovit će se samo
1x čak i ako tipku zvona držite
pritisnutu.
Transmitter Battery Installation
The transmitter is operated by a 3
Volt Lithium CR2032 battery, which
is included in delivery and is
preinstalled inside the transmitter.
Just remove the protective foil
sticking out from the side of
transmitter, which will establish
the electrical contact.
To replace the battery first remove
the back cover of transmitter by
carefully pressing the latch with a
small, narrow screwdriver.
Replace the old battery. Please
check if the battery is inserted
correctly according to the polarity
(+ = up). Reassemble the back
and front of the transmitter. The
transmitter is now ready for
operation.
Receiver Wall Socket Connection
The wireless receiver can be
connected to a wall socket for
electricity supply and does not need
any batteries.
Mounting the Transmitter
The pre-cut holes on the back of
transmitter can be used as a
template to mark the drilling holes.
The respective wall-plugs and
screws are included in delivery.
Alternatively the trans-mitter can be
fixed with an adhesive base, which
is also included in delivery.
(Only for use on suitable surfaces)
Instalacija baterije oddajnika
Oddajnik poganja 3 voltna litijeva
baterija CR2032, ki je vsebovana v
obsegu dobave in že vložena.
Odstranite samo zaščitno folijo, ki ob
strani gleda ven iz oddajnika, tako da
se vzpostavi električni kontakt.
Za menjavanje baterije najprej
odstranite hrbtno stran oddajnika, tako
da zapah s pomočjo ozkega izvijača
previdno vtisnete.
Staro baterijo zamenjajte.
Prekontrolirajte, ali je baterija v skladu
z navedeno polarizacijo (+ = zgoraj)
pravilno vstavljena. Hrbtno in sprednjo
stran oddajnika zopet sestavite.
Oddajnik je sedaj j pripravljen za
uporabo.
Priključitev sprejemnika na vtičnico
Brezžični sprejemnik se za napajanje
priključi na vtičnico in ne potrebuje
baterij.
Pritrditev oddajnika
Obe predhodno narejeni luknji
na hrbtni strani oddajnika lahko
uporabite kot šablono za označevanje
vrtin. Ustrezni zatiči in vijaki so
vsebovani v obsegu dobave.
Alternativno se lahko oddajnik pritrdi s
pomočjo lepilnega podnožja, ki je prav
tako vsebovano v obsegu dobave.
(Samo za ustrezne površine)
3
2
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Heidemann 70801 - HX Plug-in at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Heidemann 70801 - HX Plug-in in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Heidemann 70801 - HX Plug-in

Heidemann 70801 - HX Plug-in User Manual - German, Dutch, French, Italian - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info