665922
3
Zoom out
Zoom in
Previous page
1/10
Next page
SLOGBD
HR
Benutzen Sie zur Befestigung das
mitgelieferte Montagematerial.
Lassen Sie zwischen Konverter
und Wand einen Abstand von
ungefähr 3 mm, so dass Sie den
Konverter mühelos auf- und
abhängen können.
Tipp:
Testen Sie vor der Endmontage
die Funktion und Reichweite.
Wichtig:
Durch montieren des Konverters
auf PVC Türrahmen und/oder Metall-
oberflächen wird die Reichweite
eingeschränkt.
Einstellung der Sensorempfindlichkeit:
Damit der Konverter optimal
funktioniert müssen Sie ihn auf
Ihre Klangquelle einstellen.
Im Batteriefach rechts über
den Batterien befindet sich der
Einstellungsregler für den Sensor.
Drehen Sie diesen mit einem
kleinen Schlitzschraubendreher
nach links bzw. rechts um die
Sensibilität des Sensors
einzustellen. Nach einigen Tests
werden Sie die für Sie optimale
Empfindlichkeit eingestellt haben.
Use the supplied mounting
fitments for installation. Leave a
gap of approximately 3 mm
between the converter and the
wall, so that you can hang the
converter up and take it down
effortlessly.
Tip:
Test the operation and range
before final mounting.
Important:
The range will be reduced if you
mount the converter on PVC door
frames and/or metallic surfaces.
Setting the sensor sensitivity:
In order that the converter
operates to best effect, you must
match it to your sound source. In
the battery compartment, to the
right above the batteries, is the
setting screw for the sensor. Turn
this to the right or left with a
small screwdriver to adjust the
sensitivity of the sensor. After a
few tests, you will have set the
ideal sensitivity for you.
Za pritrditev uporabite dobavljeni
montažni material. Med
pretvornikom in steno pustite
približno 3 mm razdaljo, tako da
lahko pretvornik brez težav
obesite in snamete.
Nasvet:
Pred dokončno montažo testirajte
delovanje in domet.
Pomembno:
Z montažo pretvornika na vratne
okvirje, izdelane iz PVC-ja in/ali na
kovinske površine, se domet
omeji.
Nastavitev občutljivosti oddajnika:
Da pretvornik optimalno deluje,
ga morate nastaviti na vaš vir
zvoka. V predalčku za bateriji
desno nad baterijama je
regulator za nastavitev senzorja.
S pomočjo majhnega izvijača za
vijake z zarezo ga vrtite v levo
oz. desno, da nastavite
občutljivost senzorja. Po nekaj
testih ga boste nastavili na za
vas optimalno občutljivost.
Za pričvršćivanje koristite
isporučeni montažni materijal.
Između pretvarača i zida ostavite
približno 3 mm razmaka kako
biste pretvarač mogli
jednostavno okačiti i skinuti.
Savjet:
Prije konačne montaže provjerite
funkciju i domet.
Važno:
Montirate li pretvarač na okvire
vrata od PVC-a ili metalne
površine, ograničit ćete njegov
domet.
Namještanje osjetljivosti senzora:
Da bi pretvaroptimalno radio,
morate ga postaviti na postojeći
izvor zvuka. U pretincu za
baterije desno iznad baterija
nalazi se regulator za
namještanje senzora. Malim
plosnatim odvijačem zakrenite
ga ulijevo ili udesno kako biste
prilagodili osjetljivost senzora.
Nakon nekoliko provjera trebali
biste postići vama optimalnu
osjetljivost.
AA, LR6
AA, LR6
S
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Heidemann 70372 - HX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Heidemann 70372 - HX in the language / languages: English as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Heidemann 70372 - HX

Heidemann 70372 - HX User Manual - German, Dutch, French, Italian - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info