534568
13
Zoom out
Zoom in
Previous page
1/16
Next page
Programming SABRE SB35 to Respond to Your TV Remote
13
SB35
Subwoofer Phase Adjustment (0-180°)
This switch determines whether the subwoofer’s piston-like action moves in and out
in phase with the speakers in the soundbar. If the subwoofer were to play out of phase
with the soundbar speakers, some of the sound waves produced by the soundbar and
subwoofer could be canceled out at some frequencies, reducing the bass performance
and sonic impact. This phenomenon depends on the relative placement of all the
speakers in the room up to some extent.
Programming SABRE SB35 to Respond to Your TV
Remote
You can program the SABRE SB35 to make it respond to your TV remote’s power, mute,
volume up and volume down commands. This programming lets you control your
whole system with your TV remote. Before beginning to program the SABRE SB35, have
your TV remote in hand. We recommend sitting down in front of the soundbar.
NOTE: Some steps will time out, so read through this entire procedure
before you begin.
Have the TV remote in hand. When you start programming the remote, be ready to
aim the TV remote control in front of the soundbar from about 300 mm 900 mm
(about 12 – 36 inches) away.
To program the Power, Volume and Mute command:
1. Ensure that the SABRE SB35 is switched ON.
2. On the soundbar, press and hold the Surround button until the
display on the SABRE SB35 indicate you are in learning mode.
To program the Power command:
Press the Power button on the soundbar and press the power button on the
TV remote control.
To program the Volume command:
Press the Volume + button on the soundbar and press the Volume + button
on the TV remote control.
Press the Volume – button on the soundbar and press the Volume – button
on the TV remote control.
To program the Mute command:
Press the Volume + and Volume – button on the soundbar and then press
the Mute button on the TV remote.
Once you complete programming your remote control, press and hold the soundbar’s
Surround button to exit the programming mode.
NOTE: If you would like to program a new TV remote control or you are
missing a command, restart the whole process.
If you would like to cancel the learning, reset the SB35. Put the SB35 in Standby mode,
press and hold the Surround and Volume – button simultaneously. Once factory
defaults are restored, the SB35 surround button will flash white for one second, then
the unit will enter into operational mode.
Resetting Factory Default Settings
If you want to restore all the settings to factory default setting, press Surround and
Volume – keys in standby mode.
The factory default setting values are shown in the table below.
Item Value
Source Optical
System Volume -20dB
Surround Mode Stereo
WAVE Medium
Harman Volume Low
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon SABRE SB35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon SABRE SB35 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon SABRE SB35

Harman Kardon SABRE SB35 User Manual - German - 16 pages

Harman Kardon SABRE SB35 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info