534542
6
Zoom out
Zoom in
Previous page
1/10
Next page
Onyx
Operation
6
Ad-hoc Mode
If you have a Mac or PC computer, or other phone or tablet, use the following method
to connect to the system:
1. Put the Harman Kardon Onyx into Ad-hoc mode by touching
the Wi-Fi button for more than 5 seconds (ensure there
are no USB devices plugged into the USB port).
2. Go to the Wi-Fi Settings page on your Mac, PC or Phone and
connect to the network with the name HK_Onyx*****.
This may take around 40 seconds depending on your device.
3. Open your web browser and enter the IP address as
192.168.1.1 in the address bar of your browser.
The following page will be displayed.
4. Select the name of the Wi-Fi network you want to connect
from the drop-down menu Device Wireless SSID.
5. Enter the password for your network and click Connect.
A warning box will be displayed.
6. Ensure that you have entered the password correctly. If you are not sure,
click Cancel and enter the password again without any mistake.
The Harman Kardon Onyx will then attempt to connect to your Wi-Fi network. If the
connection is successful, the Wi-Fi LED will turn white and the connection successful
tone can be heard.
NOTE: To restore the factory default settings, long press Bluetooth and
Power button in Operational mode.
Operation
Switching ON and OFF
The power button on the top panel of the speaker allows you to set your speaker to any
of the following power modes:
Operational mode – White constant LED illumination
Sleep mode – Amber constant LED illumination
OFF mode – No illumination
To change the power mode:
Short press - Operational/Sleep mode: show battery status
Long press - OFF mode: wake up to Operational mode, Operational/Sleep
mode: enter OFF mode
Adjusting Volume
The volume buttons on the top panel allow you to increase or decrease volume. These
buttons are touch-sensitive, allowing volume control with a gentle finger-touch of the
buttons. Adjust volume using the Volume Up (“+”) and Volume Down (“–”) buttons
located on top of the unit.
Short press - Increase/decrease volume by 1 step
Press and hold - Increase/ decrease volume continuously (1 step per 0.2
second)
Playing Music through Bluetooth
1. Press the Power button. The LED will illuminate white.
The HK Onyx enters pairing mode the first time it is switched on.
2. If HK Onyx has been paired with any source before, touch
and hold the Bluetooth button for at least 4 seconds.
3. Perform a new device search on your Bluetooth-capable device.
4. Select HK Onyx BT on the device’s pairing list and enter pasword as 0000.
The device will be paired to HK Onyx automatically. If pairing is successful,
the Onyx’s Status LED will change to white.
5. Control playback from your Bluetooth-capable device.
6. You can change the name of the speaker for easy
identification using the H/ K Remote app.
6


Need help? Post your question in this forum.

Forumrules
1

Forum

harman-kardon-onyx

Reset search

  • Jeg kan ikke parre med en iPhone X når man tænder blinker dioden hele tiden. Den har tidligere parret fint med en iPhone 6S. Mvh. OLeP-S Submitted on 20-2-2022 at 11:51

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon Onyx at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon Onyx in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon Onyx

Harman Kardon Onyx Quick start guide - English - 2 pages

Harman Kardon Onyx User Manual - German - 10 pages

Harman Kardon Onyx User Manual - Dutch - 10 pages

Harman Kardon Onyx User Manual - Danish - 10 pages

Harman Kardon Onyx User Manual - French - 10 pages

Harman Kardon Onyx User Manual - Italian - 10 pages

Harman Kardon Onyx User Manual - Portuguese - 10 pages

Harman Kardon Onyx User Manual - Swedish - 10 pages

Harman Kardon Onyx User Manual - Spanish - 10 pages

Harman Kardon Onyx User Manual - Finnish - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info