769916
4
Zoom out
Zoom in
Previous page
1/6
Next page
NOTE: If the headphones with the factory-installed metal bow do not t comfortably on your
head, you can install the supplied larger metal bow to achieve a more comfortable t. Refer to
the accompanying sheet for instructions on changing the bow.
CHARGING YOUR HEADPHONES
1. Connect the supplied charging cable to the charging connector and to another device’s
standard USB port. The charging LED will illuminate red. Note: You cannot use the head-
phones while they are charging.
2. Charging time is approximately 2 hours. (Charging from mobile devices such as laptop
computers may take longer.) When the headphones are fully charged the charging LED will
turn off.
During normal operation, when the battery is low the BT LED will ash red slowly.
TURNING YOUR HEADPHONES ON AND OFF
Press the BT button for approximately two seconds to turn the headphones on and off. The BT
LED illuminates blue for two seconds to indicate that the headphones are on, then turns off.
The BT LED illuminates red for approximately two seconds to indicate that the headphones are
off, then turns off.
PAIRING YOUR HEADPHONES WITH A BLUETOOTH-CAPABLE DEVICE
1. Turn the headphones off.
2. Press and hold the BT button for six seconds. The BT LED will ash blue rapidly.
3. Perform a new device search on your Bluetooth-capable device.
4. Select “harman BT.” If your device requests a passcode, use 0000.
5. When the headphones are paired with the device, the BT LED will ash blue twice and turn
off for ve seconds; it will continue in this pattern while the headphones are paired and in
standby.
If your harman/kardon BT headphones were paired with your device the last time you used
them, it is likely all you will have to do to re-establish the connection is turn your the head-
phones on.
The Bluetooth operating range (depending on your device) is approximately 26 feet (8m).
OPERATION: MUSIC
Depending on your Bluetooth-capable device’s software version, some of the functions men-
tioned in this owner’s manual may not be supported.
Play/Pause: Press the
button
Skip ahead to the next track: Press the
button quickly two times
Skip ahead to the last track: Press the
button quickly three times
Raise and lower the volume: Press the + and – buttons
If the harman/kardon BT headphones battery is empty or you do not need Bluetooth functional-
ity you can use the supplied bypass cable to connect the headphones to a device that has a
standard 3.5mm stereo headphone connector. (Turn the headphones off before connecting
the cable.)
Note: The headphone controls do not function in this mode. Use the controls on the device.
OPERATION: PHONE
To place or end a call: Press the
button
To reject an incoming call: Press and hold the
button
Raise and lower the volume: Press the + and – buttons
During a call, pressing the
button will transfer the call between the HK BT headphones and
the transmitting phone.
RESETTING THE CONNECTIONS
1. Turn the headphones off.
2. Press and hold the BT button and the – button simultaneously for more than eight seconds.
LED INDICATIONS
= blue
= red
= off
BT LED ACTIVITY STATE
■■■■■
Power On
■■■■■
Power off
■ ■ ■ ■ ■ ■ ■ ■
Bluetooth pairing mode/incoming call/
outgoing call
■ ■ ■ ■ ■ ■ ■ ■
Standby (paired with Bluetooth device)/
Active call
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Standby/AAC mode play – pause
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Standby/apt-X mode play – pause
■ ■ ■ ■ ■ ■ ■ ■
Standby (not paired with Bluetooth device)
■ ■ ■ ■ ■ ■
Low battery
Connections reset
CHARGING LED ACTIVITY INDICATION
Charging
Charged
SPECIFICATIONS
Frequency range: 2.4GHz – 2.4835GHz
Transmitter power: <3.0mW
Modulation: GFSK/ π /4-DQPSK/8-DPSK
Charger voltage: 5V
Nominal voltage: 3.7V DC
Operating temperature: +41°F – +95°F (+5°C – +35°C)
Supports Bluetooth 2.1+EDR, A2DP v1.2, AVRCP v1.0, HSP v1.2 and HFP v1.5.
Supports AAC, aptX, cVc.
WARNING
Do not expose the headphones to excessively high temperatures (i.e. do not use in strong
direct sunlight or in a hot vehicle).
Do not expose the headphones to dripping or splashing liquids.
Do not place objects lled with liquids, such as vases, on the headphones.
Do not place a naked ame source, such as a lighted candle, on the headphones.
Do not block ventilation openings with items such as newspapers, tablecloths, curtains, etc.
Do not expose the battery to excessive heat, such as from direct sunlight, re, or similar.
Follow local environmental regulations regarding battery disposal.
Listening to headphones at excessive sound pressure levels can cause hearing loss.
If you suspect any kind of battery defect (such as leakage, smell or overheating when not in
use) or any other damage, stop using the headphones.
Do not open the headphones under any circumstances.
These headphones contain small parts that are hazardous if ingested of inhaled: keep away
from small children when they are unattended.
Only use this device with the cables supplied.
EN
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon Harkar BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon Harkar BT in the language / languages: All languages as an attachment in your email.

The manual is 1.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info