534559
8
Zoom out
Zoom in
Previous page
1/11
Next page
AVR
8
AVR Setup
Set Up the AVR
Install the Batteries in the Remote Control
Remove the remote control’s battery cover, insert the two supplied AAA batteries as shown in
the illustration, and replace the battery cover.
1. Remove
Cover
2. Insert
Batteries
3. Replace
Cover
NOTE: Remove the protective plastic from the AVR’s front panel so it doesn’t reduce the
remote control’s effectiveness.
Using the Remote Control
You will be using the following remote-control buttons to congure your AVR:
Left/Right/Up/Down
Buttons
Back/Exit
Button
AVR
Button
OK
Button
OSD/Menu
Button
Turn On the AVR
Press the front-panel Power button.
Power Button
Configure the AVR for Your Speakers:
AVR 1710/AVR 171/AVR 1610/AVR 161
Note: The on-screen menus shown in this guide may differ slightly from your AVR’s actual
menu screens.
Before you use your AVR you need to congure it to work with your particular speaker
system. Your AVR’s EZSet/EQ
Plus system uses the supplied EzSet/EQ microphone to
detect the capabilities of each connected speaker and optimize the AVR’s performance
for them automatically. Before beginning, be sure you have correctly connected your
speakers to the AVR.
1. Plug the supplied EzSet/EQ
microphone into the AVR’s Headphone connector.
AVR Headphone Connector
EzSet Microphone (supplied)
2. Place the microphone at ear height in your listening position.
3. Turn on your TV and select the TV input where you connected the AVR in Connect Your
TV or Video Display, on page 4.
4. Press the remote control’s AVR button, then press the OSD/Menu button. The AVR’s
on-screen display (OSD) setup menu will appear on the TV. (Note: If you have used
a composite video connection to your TV, the OSD menus will not appear on your TV.
Follow the steps below using the AVR’s front-panel display.)
MASTER MENU
Source Select
Source Setup
Surround Mode
Speaker Setup
Zone2
Network
System Setup
5. Use the remote’s arrow and OK buttons to select “Speaker Setup.”
Speaker Setup
Auto: EZ Set/EQ
Manual Setup
6. Select “Auto: EZ Set/EQ.”
7. Select “Continue.”
8. Follow the instructions that appear on the screens. Remain quiet while the test noise
plays through the speakers.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR 1510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR 1510 in the language / languages: English as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR 1510

Harman Kardon AVR 1510 User Manual - English - 47 pages

Harman Kardon AVR 1510 User Manual - Dutch - 47 pages

Harman Kardon AVR 1510 User Manual - French - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info