495094
10
Zoom out
Zoom in
Previous page
1/12
Next page
*#1 :2-Owner’s Manual
10
MIDI CHANNEL, MERGE
Setting the MIDI channel
Important Notes on MIDI Merge
The factory default setting for the Pedalboard is channel 3.
If you want to change it follow the procedure below:
Start with the power turned off. Turn on the power while
holding down the highest G pedal and the pedal correspond-
ing with the MIDI channel. (See the illustration on the left.)
The LED light on this unit will blink the same number of
times as the number of the MIDI channel selected. The set-
ting is memorized and will remain in memory even if the
power is turned off.
This unit is equipped with the MIDI merge function. This feature allows MIDI playing
information received at the MIDI IN jacks to be merged (blended) with the MIDI infor-
mation from the Pedalboard and sent out the MIDI out jack.
PLEASE NOTE several points regarding this feature.
The MIDI messages to be merged
The MIDI merge function of this Pedalboard will only merge the channel messages. It
does not merge such system message as system exclusive messages or MIDI clock.
Duplication of the MIDI channel
The Channels assigned to the MIDI INs must be different than the channel of the
Pedalboard in order to provide proper music parts to the host keyboard.
The MIDI loop
If the MIDI information sent out of the MIDI OUT Jack of this Pedalboard returns to the
MIDI in jack, a MIDI information loop happens and this causes a malfunction.
If the MIDI IN/OUT of this unit and those of the external equipment are connected, set
the echo-back (MIDI thru) function or the local control function to correct the problem.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XPK-200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XPK-200 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info