495106
9
Zoom out
Zoom in
Previous page
1/12
Next page
Installation Using an 11-pin Rotary Leslie and a 525 or 3301 Leslie
1. Carefully position the Leslie 525 or 3301 on top of your 11-pin
rotary Leslie speaker.
2. Plug the female Leslie connector that is the farthest away from the
male Leslie connector found on the optional 11-pin Leslie “Y”
adapter into the 11-pin Leslie connector located on the back of the
Leslie 525 or 3301.
3. Plug the remaining female Leslie connector found on the 11-pin
Leslie “Y” adapter into the 11-pin Leslie connector located on the
back of your Leslie rotary speaker.
4. Plug the male Leslie connector found on the Leslie “Y” adapter into
the 11-pin Leslie cable assembly usually supplied with your Leslie
rotary speaker. If additional Leslie cable assemblies are needed, you
can purchase them from your local Leslie dealer. The other end of
the Leslie cable assembly should be plug into the 11-pin Leslie
connector found on your organ or keyboard product.
5. Plug the AC power cords from the Leslies into a 120V AC outlet.
6. Turn the Master volume controls on your Leslie 525 or 3301 (see
page 3) to the fully counterclockwise position. Set the bass and
treble controls to the mid-position.
7. If you are connecting a Hammond organ to your Leslie, pull all the
upper and lower drawbars including the pedal drawbar fully out
(#9 positions). Set the expression pedal to the loudest position
(fully depressed). For non-Hammond products, set the volume
control to the loudest position and set the voice registration to a
setting that provides maximum sound (i.e. Full organ).
8. Turn on the power switch on your organ or keyboard product. For
organs, play a three-note chord on the upper and lower manuals and
depress the low “C” pedal. For keyboards, place the unit in the split
keyboard mode and play a three-note chord on the upper manual and
the low ”C” pedal note. Have someone slowly turn the volume
control clockwise on the Leslies 525 or 3301until the sound begins
to distort, then slowly decrease the volume (turn the control
counterclockwise) until the sound is undistorted. Your volume
control is now properly set.
This Setup procedure should be followed when connecting an organ or keyboard equipped with an 11-pin
Leslie connector to an 11-pin rotary Leslie speaker such as Leslie 122XB, 971, or 3300, and a Leslie 525 or
3301. In this installation, the Leslie 525 or 3301 is placed directly on top of the rotary Leslie speaker. The
purchase of an optional 11-pin Leslie “Y” adapter from your local Leslie dealer is required to complete this
installation.
www.hammondorganco.com
8
Leslie Y cable
971 or other
Leslie 11-pin
male socket
Organ or Keyboard
female Leslie 11-pin socket
11-pin Leslie cable
525 or 3301
Leslie 11-pin
male socket
Caution: Do not play your Leslie at a volume setting that produces a
distorted sound. Severe damage may occur to your new Leslie if
played in this condition for an extended period of time.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond Leslie 525 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond Leslie 525 in the language / languages: English as an attachment in your email.

The manual is 15,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info