495106
5
Zoom out
Zoom in
Previous page
1/12
Next page
Leslie Setup Procedures
1. Place your Leslie 525 or 3301 speaker in a location that produces the best sound reproduction.
2. If you wish to connect your Leslie by means of an 11-pin Leslie cable assembly, carefully plug the male
end of the 11-pin Leslie cable assembly into the female socket located on your organ or keyboard. You
also have the option of connecting your organ or keyboard to your Leslie 525 or 3301 by means of a cable
with ¼” plug on both ends (not provided). Plug one end of the cable assembly into the Line Out jack on
your organ or keyboard, and the other end to the Line In jack on the Leslie. Then proceed to step 4.
3. Repeat the above procedure to connect the other end of the Leslie cable to the Leslie speaker.
4. Plug the AC power cord from the Leslie into a 120V AC outlet.
5. Turn the Master volume control on the Leslie (see page 3) to the fully counterclockwise position. Set the
bass and treble controls to the mid-position.
6. If you are connecting a Hammond organ to your Leslie, pull all the upper and lower drawbars including
the pedal drawbar fully out (#9 positions). Set the expression pedal to the loudest position (fully
depressed). For non-Hammond products, set the volume control to the loudest position and set the voice
registration to a setting that provides maximum sound (i.e. Full organ).
7. Turn on the power switch on your organ or keyboard product and on your Leslie if you are using the ¼”
Line Input jack. For organs, play a three-note chord on the upper and lower manuals and depress the low
“C” pedal. For keyboards, place the unit in the split keyboard mode and play a three-note chord on the
upper manual and the low ”C” pedal note. Have someone slowly turn the volume control clockwise on
the Leslie until the sound begins to distort, then slowly decrease the volume (turn the control
counterclockwise) until the sound is undistorted. Your volume control is now properly set.
In most cases, your local Leslie dealer will connect your new Leslie speaker to your organ or keyboard
product. In the case that no setup was provided or if you wish at a later time to move your Leslie speaker to
another location, please carefully read and follow the appropriate setup procedure.
www.hammondorganco.com
4
Caution: Do not play your Leslie at a volume setting that produces a distorted sound. Severe damage
may occur to your new Leslie if played in this condition for an extended period of time
Single Leslie Installation
This Setup procedure should be followed when connecting an organ or keyboard to a single Leslie 525
or 3301.
Lesie 525 or 3301
Organ or Keyboard product
11-pin Leslie cable
assembly or audio
cable with 1/4” jacks
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond Leslie 525 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond Leslie 525 in the language / languages: English as an attachment in your email.

The manual is 15,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info