495095
33
Zoom out
Zoom in
Previous page
1/35
Next page
29
Hold 1(Leslie Slow/Fast initial Code)
Status 2nd Byte 3rd Byte
Bn 40 vv
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
vv=Control Value: Leslie Slow/Fast Control Type=Mormentary:
00 - 7F(0 - 127) 0-63 = Off, 64-127 = On
Leslie Slow/Fast Control Type=Altarnate:
00 - 7F(0 - 127) 64-127 = Latch
NRPN MSB/LSB
Status 2nd Byte 3rd Byte
Bn 63 mm (MSB)
Bn 62 ll (LSB)
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
mm=Upper Byte of the Parameter Number designated by NRPN[MSB].
ll=Lower Byte of same[MSB].
NRPN- "Non Registered Parameter Number"
The expansive range named NRPN is provided in the Control Change,
which function is specific on each equipment and not defined in the
MIDI Standard.
When you use it, designate the parameter to control, by gibing NRPN MSB
and NRPN LSB (cc#98 and 99), and the set the value of the designated
parameter by the Data Entry MSB(cc#6).
Once the NRPN parameter is designated, all the data entry received into
the same channel after that is regarded as the change of the value of the
parameter. To avoid any mis-operation, we suggest you to set RPN Null
(RPN = 7F 7F), after setting the necessary parameter value.
S
y
stem Exclusive Messa
g
e
Memory Dump
F0
System Exclusive
55
SUZUKI ID
10
Device ID
10
Model ID MSB
12
Model ID LSB
11
Command: Data Packet
[TYPE]
Data Type
00h= Memory Dump
[PNH]
Packet Number MSB
[PNL]
Packet Number LSB
[DATA]
128 Bytes Data
256 Bytes nibblized ASCII
ex: 7Eh = 37h, 45h
[CHD]
Check Digit
Lower 7 bits of XOR [DATA]
F7
End of Exclusive
Roland Leslie Slow Fast
F0
System Exclusive
41
Roland ID
10
Device ID
00
Model ID MSB
08
Model ID LSB
12
Command ID
02
address1
00
address2
10
address3
3D
address4
[DATA]
00:Slow 01:Fast
[SUM]
no check
F7
End of Exclusive
MIDI Information
[Channel Voice Message]
Control Change
Program Change messages etc. are received.
Modulation(Leslie Speed)
Status 2nd Byte 3rd Byte
Bn 01 vv
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
vv=Modulation Depth: 00 - 7F
Data Entry
Status 2nd Byte 3rd Byte
Bn 06 mm (MSB)
Bn 26 ll (LSB)
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
mm,ll=Value for the Parameter designated by NRPN.
Expression(Leslie Speed)
Status 2nd Byte 3rd Byte
Bn 0B vv
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
vv=Expression: 00 - 7F(0 - 127)
Default Value = 7F(127)
Korg Rotary Fast Code
Status 2nd Byte 3rd Byte
Bn 52 vv
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
vv=Control Value: 00 - 7F(0 - 127) 0-63 = Off, 64-127 = On
Korg Rotary Brake Code
Status 2nd Byte 3rd Byte
Bn 53 vv
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
vv=Control Value: 00 - 7F(0 - 127) 0-63 = Off, 64-127 = On
The value set by the Control Change is not reset even when
Pro
g
ram Chan
g
e
Status 2nd Byte
Cn pp
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
pp=Program Number 0:preset1 1:preset2
Program Channel: Change Preset.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond Leslie 2101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond Leslie 2101 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info