495105
4
Zoom out
Zoom in
Previous page
1/8
Next page
Your new Leslie speaker system contains two rotors to produce the world-renowned “Sound-In-
Motion” effect. The upper frequencies are reproduced by the world-famous Ferro Fluid high-
compression driver and a custom-molded rotary horn. The lower frequencies radiate from the massive
15” woofer and the high-density custom-molded foam drum. The rotors can be operated in Fast
(Tremolo) or Slow (Chorale) modes. Our model 122XB Leslie also features an Off mode (rotors
stopped).
Product Overview
CAUTION
FOR CONTINUED
PROTECTION
AGAINST FIRE
HAZARD REPLACE
ONLY WITH SAME
TYPE 2A FUSE
The model 122A Leslie is specifically designed for older Hammond
organs such as Hammond organ models A, B, C, and RT, that require
a separate tone cabinet for sound reproduction. The Leslie 122A is
provided with a 6-pin Leslie connector to facilitate easy connection to
these Hammond organ products when used with the proper interface
kit (available at your local Leslie dealer). A Master Volume control,
which is located on the top of the power amplifier, is also provided.
The model 147A Leslie, which shares the same cabinet design as the
Leslie 122A, is recommended for single-channel organs with self-
contained speaker systems, such as Hammond organ model A-100 and
spinet models such as M, M-2, M-3, M-100 and L-100. In addition to
the 6-pin Leslie connector and Master Volume control, the 147A also
contains an Input Selector switch which is located to the left of the
Master Volume control on the top of the power amplifier. This switch
is used to electrically match the impedance of your organ speaker
system. We strongly recommend that a factory-trained technician set
the position of this switch.
The Leslie 122XB is electrically identical to the model 122A, except that it contains an 11-pin Leslie
connector, a ¼” Line Input jack, ¼” foot switch jack and an AC power switch. These features make the
122XB extremely easy to be connected to most keyboard products on the market today. The Leslie
122XB is also designed to interface with newer Hammond organs and keyboards like the New B-3,
Traditional and Pro XK Systems, and our XK-3 keyboard, that contain an 11-pin Leslie connector.
CAUTION
FOR CONTINUED
PROTECTION
AGAINST FIRE
HAZARD REPLACE
ONLY WITH SAME
TYPE 2A FUSE
Volume Control
6-pin Leslie Connector
Input Selector Switch
122A
147A
Volume Control
6-pin Leslie Connector
Diagram of Models 122A, 122XB, 147A
2-Speed Horn Rotor
Crossover
Network
15” Speaker
2-Speed
Foam Rotor
40W Amplifier
Signal Input
CAUTION
FOR CONTINUED
PROTECTION
AGAINST FIRE
HAZARD REPLACE
ONLY WITH SAME
TYPE 2A FUSE
ON
LINE IN
FOOT SW
AC Power Switch
Line Input Jack
Foot Switch Jack
11-pin Leslie Connector
Volume Control
122XB
OWNERS MANUAL Models 122A, 122XB, 147A
3
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond Leslie 147A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond Leslie 147A in the language / languages: English as an attachment in your email.

The manual is 12,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info