723726
17
Zoom out
Zoom in
Previous page
1/19
Next page
13
PBC setup
Press and hold the [WIFI SETUP]button (network
pairing) (5) for about 3seconds.
The network status LED (5) ashes green.
Press the WPS button on your router or current access
point. This can often be done using the web interface,
as well.
Consult the operating instructions of your router or
access point for details.
Once the process has been started on the router or
access point, the soundbar should be able to nd and
connect to the network.
Note
Press the [WIFI SETUP]button (network pairing) (5)
to cancel PBC setup.
Open/unsecured network
Note
We recommend against establishing unsecured
connections and advise you to always protect your
network against unauthorised access.
If your desired network has no safeguards, it is
enough to select the network from the list and
conrm your selection. The soundbar then promptly
connects to the access point.
18. Activate pairing mode /connection to another
home network
Press and hold the [WIFI SETUP]button (network
pairing) (5) for about 5seconds. The network status LED
(5) pulsates.
The soundbar can now be connected to anew network
(as described in Section 6.2).
19. Connection between subwoofer and soundbar
(pairing)
Press and hold the [PAIRING]button on the subwoofer
until the LED light of the subwoofer begins to ash.
Then press the [PAIRING]button on the soundbar for
about 5seconds. The two devices then connect to one
another automatically.
20. Using your existing remote control
Note –Remote control
To enable programming, the remote control being
taught must have an infrared transmitter.
If the remote control has adifferent standard(for
example, Bluetooth), learning is not possible.
To check the standard: Point the remote control at
your smartphone’scamera. Check the remote control
for light pulses. If thereare light pulses on the remote
control, it is an IR remote control.
Button programming
The soundbar has alearning function. It allows you to
transfer up to three of your soundbar’sfunctions to any
remote control (for example, that of your TV set).
Press and hold both [VOLUME+/-]buttons (4) on the
soundbar at the same time. Keep them held for about 3
seconds to activate the learning mode. The LEDs on the
soundbar begin to ash quickly.
On the soundbar,press the button whose function you
want to transfer to abutton on the remote control.
On the remote control, press the button to be
programmed with the function.
The LEDs (7), (8) and (9) on the soundbar ash blue to
indicate successful learning. If learning has failed, these
LEDs will ash redthree times.
Note
The learning process is ended without saving, if no
button is pressed or no signal received for longer than
10 seconds.
Deleting programmed buttons
Press the [Action / Microphone mute](3), [VOLUME
+]and [VOLUME -](4) buttons at the same time to
delete all buttons with learnt functions.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama SIRIUM3800ABT - Soundbar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama SIRIUM3800ABT - Soundbar in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama SIRIUM3800ABT - Soundbar

Hama SIRIUM3800ABT - Soundbar User Manual - German - 19 pages

Hama SIRIUM3800ABT - Soundbar User Manual - Dutch - 19 pages

Hama SIRIUM3800ABT - Soundbar User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info