Manual Hama Prestige - 16309 (page 4 of 11) (English, German, Dutch, French, Italian, Spanish)

607746

Zoom out

Zoom in

1/11

6 7

Pairing

Prior to using the speakerphone for the ﬁ rst time, you must pair it with a Bluetooth-enabled mobile handset. The following

steps describes pairing instruction for a typical Bluetooth-enabled mobile handset.

(a) Place the speakerphone and mobile handset no more than 1 meter apart.

(b) Ensure the speakerphone is under OFF mode.

(c) Press and hold the MFB for 6 seconds until you hear a long beep. The blue and red LEDs will ﬂ ash on alternatively. It’s now

ready for pairing.

(d) Activate your mobile handset’s Bluetooth function by referring to your mobile handset user guide for details. Mean while,

the handset will search for accessible Bluetooth devices.

(e) Select “BT-33A1” from the list.

(f) Enter the pre-programmed passkey “0000” and press “OK” to pair the speakerphone and the handset. When pairing is

completed, you may hear a long beep and the blue LED will ﬂ ash on 3 times. Now the speakerphone is under standby mode

with blue LED ﬂ ashes on every 3 seconds.

(g) Press “Return” to go back to your handset’s main menu. (For most of the mobile handset models, a headset icon will be

shown on the screen.) You should now be able to make and receive calls through the speakerphone. Please place the

mobile handset to the speakerphone no more than 10 meters. (Obstruction could cause shorter sensing distance.)

IMPORTANT: If the pairing cannot be completed within 2 minutes while the pairing mode is activated, the speakerphone’s

LED will ﬂ ash off and speakerphone will be under off mode. Please repeat step (c) to (g) to pair the speakerphone and mobile

handset again.

Connection/Link between Speakerphone and Mobile Handset:

After pairing is completed, speakerphone is always under standby mode. Before you place or answer a call, if the headset ICON

is not shown on phone screen, please follow the simple steps to activate the Bluetooth connection/link through your handset or

speakerphone until the headset ICON is on the screen.

(1) On Handset: Select “BT-33A1” from the paired list on your handset screen.

(2) On Speakerphone: Short press MFB and select “Accept” on handset screen to accept connection.

IMPORTANT: Whenever Bluetooth connection/link is removed, for example: power off on speakerphone/mobile handset or out

of 10 meter sensing distance, please activate connection/link as suggested.

Disconnection between Speakerphone and Mobile Handset:

You may connect your speakerphone with another Bluetooth handset. Please follow the simple steps to disconnect the

speakerphone with the pre-paired handset.

(a) Power off the speakerphone.

(b) Select “disconnecting” to remove previous connection from your handset list.

Using the Speakerphone

Once pairing is completed, you may access the following functions. Some of the below-mentioned function is only accessible

for handsets supported with Hands-Free Proﬁ le.

(a) Answering a Call:

To answer a call, wait for the speakerphone to ring, then short press the MFB to accept the call or answer the call via your

mobile handset in the normal way.

(b) Ending a Call:

Short press the MFB, to end your call or end the call via your mobile handset in the normal way. Mean while you can hear a

short beep from the speaker.

When you hear the ringing tone, press and hold the MFB for 3 seconds until you hear a short beep.

(d) Voice Dialing:

If your mobile handset is voice dialing enabled, under standby mode, press the MFB and when you hear a beep, say the voice

tag.

IMPORTANT: Please make sure to record voice tag into the mobile handset before using voice dialing function. This

function is only applicable to mobile handset with Bluetooth Hands-Free Proﬁ le. Functionality varies depending on the

mobile handset models you have. Please refer to your mobile handset user guide for additional information.

(e) Last Number Re-Dialing:

Under standby mode, short press MFB twice for last number redial.

(f) Adjusting the Volume:

During conversation in progress, press the volume button repeatedly until you reach the desired volume level.

(g) Mute & Un-mute:

To mute the speakerphone, press the mute button. Mean while, the blue LED ﬂ ash on.

To un-mute the speakerphone, press mute button again.

Restore to Default-Remove Previous Pairing & Connection

You may want to reset the speakerphone to its original settings and clear the previous pairing. Please follow these simple

steps.

(a) Ensure the speakerphone is under standby mode.

(b) Press and hold the volume increase & decrease buttons simultaneously for 10 sec. until blue & red LEDs ﬂ ash on alternatively.

Release the buttons.

(c) Again, press and hold the volume increase & decrease buttons simultaneously for 2 sec. until speakerphone emits 2 short

beeps. The speakerphone will be powered off and back to original setting.

(d) After defaulting the speakerphone, if speakerphone is power on again, the red LED will ﬂ ash on every 3 seconds and

speakerphone will emit 3 beeps every 1 minute. Then, the speakerphone will power off within 2 minutes. This is normal.

The speakerphone will be back to normal performance after completion of pairing with Bluetooth devices.

Kit Mains-Libres »Prestige«

(1) Haut-parleur

(2) Microphone intégré

(3) Prise pour oreillette en option

(4) Prise pour chargeur

(5) Touche sourdine

(6) Touche multifonctions

(7) Touche d‘augmentation du volume

(8) Touche de réduction du volume

(9) DEL

Remplacement de la batterie

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hama Prestige - 16309 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hama Prestige - 16309 Manual

Product: