607429

Hama EWS100 - 76043 Manual

5
Zoom out
Zoom in
Previous page
1/19
Next page
8
9
Activating the Alarm
In the normal time display, press the MODE button to
choose the alarm (A1 or A2) that you want to activate.
Silencing the alarm
• When the alarm sounds press any button on the front
of the base station to silence the alert.
• The alarm icon will remain on the display and he
alarm will sound every day at the preset time until the
alarm is deactivated.
Deactivating the Alarm
To deactivate the alarms, press the MODE button to
choose the alarm (A1 or A2) that you want to deactivate.
Press the SET button until the alarm bell icon is no
longer showing. Your alarm time settings will remain
and you can reactivate the alarms bye following the
instructions above.
Min/Max Memory
• Press the MAX/MIN button once to display the
highest indoor and outdoor temperatures recorded
since last reset, MAX is shown on the display.
• Press MAX/MIN a second time to display the lowest
indoor and outdoor temperatures recorded since last
reset, MIN is shown on the display.
• To clear and reset the max/min records, when either
the MAX or MIN record is shown on the LCD display,
press and hold MAX/MIN for 2-3 seconds until the
beep sounds.
Setting the Temperature Alerts
You can program you weather center to sound an alert
whenever the indoor or outdoor temperature exceed the
upper or lower pre-act-level. The outdoor alert can be
set for all remote channels.
Setting the Indoor Temperature Alert
• Press and hold the ALERT button for 3-4 seconds. The
high temperature limit icon and indoor temperature
will be fl ashing.
• Press UP or DOWN to select the high temperature
alert level.
• Press ALERT and the low temperature limit icon and
temperature will be fl ashing.
• Press UP or DOWN to select the low temperature
alert level.
• Press ALERT to return the normal mode.
• Press ALERT to activate or do-activate the alert
function. When the alert function is activated, both
the high and low limit icons will show.
Setting the Outdoor Temperature Alert
• Press and hold the ALERT button for 3-4 seconds.
• Press CHANNEL to select the cannel on which you
want to set the alert (1 to 3)
• The high temperature limit icon and outdoor
temperature for the channel you selected will be
fl ashing.
• Press UP or DOWN to select the high temperature
alert level.
• Press ALERT to return to normal mode.
• Press ALERT to activate or de-activate the alert
function. When the alert function is activated, both
the high and low limit icons will show.
Using the Countdown Timer
• In the normal display mode, press MODE 3 times to
display the countdown timer. TIMER will show on the
display.
• Press the SET button for 3-4 seconds and the hour
will be fl ashing.
• Press UP or DOWN to set the hour.
• Press SET and the minutes will be fl ashing.
• Press UP or DOWN to set the minutes.
• Press SET and the seconds will be fl ashing.
• Press UP or DOWN to set the seconds.
• Press SET to lock the time.
• Press SET to start the countdown timer.
• As the timer is counting down you can press SET to
pause. Press SET again to re-start the timer.
• After the time reaches -00- and the alarm sounds,
press any button on the front of the base station to
silence the alert. The LCD display will revert to the
normal time display.
• If you want to clear or re-set the timer before the
countdown reaches -0-, pause the countdown and
enter the new countdown time using the above
procedure.
Reset
Your multi-zone thermometer can be re-set in case of
malfunction. Press the RESET button once and the unit
will return to its original factory settings. Re-enter you
settings according to the OPERATING INSTRUCTIONS.
Registration and Safety Certification/General
Information
This device bears the CE symbol as specifi ed by the
provisions of Directive R & TTE (1999/5/EC).
Hama GmbH & Co. KG hereby declares that this device
is in compliance with the basic requirements and
other relevant guideline and regulations of the 1999/5/
EC guideline.
You will fi nd the declaration of compliance
and declaration of conformity in the Internet at
http://
www.hama.com
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama EWS100 - 76043 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama EWS100 - 76043 in the language / languages: English, German, Dutch, French, Polish, Turkish, Spanish as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info