723740
16
Zoom out
Zoom in
Previous page
1/18
Next page
13
14.4 Backlight
Manual settings
The backlight can be congured for each operating mode
(Operation Mode, Standby Mode) separately.
Proceed as follows:
Press [
] (6) and navigate to the "Settings" menu item.
Select "Backlight" and conrm by pressing [+/OK/-] (10).
For the Operation and Standby modes, select from
various brightness settings.
Automatic settings (Sensor)
With the sensor enabled, the backlight is automatically
adjusted to the environment and its brightness.
In complete darkness (for example, at night in the
bedroom), the backlight completely turns off.
To activate the automatic setting (sensor), proceed as
follows:
Press [
] (6) and navigate to the "Settings" menu item.
Select "Backlight" and conrm by pressing [+/OK/-] (10).
Select the "Automatic" setting to activate the brightness
sensor.
14.5 Factory reset
To reset the radio to the factory default settings, proceed as
follows:
Press [
] (6) and navigate to the "Settings" menu item.
Select "Factory reset" and conrm by pressing [+/OK/-]
(10).
Conrm the following prompt with [+/OK/-] (10) to reset
the radio to the factory settings.
All settings made previously are deleted.
Note
Resetting to the factory default settings can remedy
some problems and malfunctions.
However, all settings made previously, such as
favourites and station lists, are permanently deleted.
14.6 Info / software version
To have the radio display information about its software,
proceed as follows:
Press [ ] (6) and navigate to the "Settings" menu item.
Select "Version" and conrm by pressing [+/OK/-] (10).
14.7 Software update
Improvements and new features are always constantly
being developed for the software used in our radios to
resolve potential errors, increase the range of functions,
and so on. We recommend that you always install any
available updates on your radio.
Warning
Make sure that the radio has a stable power supply
before you start a software update.
Power supply failure during a software update can
cause irreparable damage to the radio.
Update port
The update port allows you to load software updates
manually.
Note
Available updates and instructions on how to install
them can be found at: www.hama.com -> 00054896,
00054231
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama DR36SBT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama DR36SBT in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama DR36SBT

Hama DR36SBT User Manual - German - 18 pages

Hama DR36SBT User Manual - French - 18 pages

Hama DR36SBT Quick start guide - All languages - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info