Manual Hama 44611 easytip 1 (page 2 of 36) (English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish)

122375

Zoom out

Zoom in

1/36

ROC4411

00131898

Operating Instructions .......................................................... 01

Mode d‘emploi ....................................................................... 05

Bedienungsanleitung ............................................................. 09

Instrucciones de uso ............................................................. 17

Istruzioni per l‘uso ................................................................. 13

Manual de instruções ............................................................ 25

Руководство по эксплуатации ......................................... 33

Gebruiksaanwijzing ............................................................... 21

Instrukcja obsługi ................................................................... 37

Használati útmutató .............................................................. 45

Οδηγίες χρήσης..................................................................... 29

Návod k použití ...................................................................... 41

S K

Návod na použitie .................................................................. 41

T R

Kullanma kılavuzu .................................................................. 41

Bruksanvisning ....................................................................... 49

Pistokelaturi ............................................................................ 61

R O

Manual de utilizare ................................................................ 41

Testing the remote control before

you programme it

1. Turn on the product you want to control.

2. Press the Mode key that corresponds to the type

of product you want to control: TV: television set,

DVD: DVD player, , SAT/STB: satellite or cable

receiver, AMP: AUDIO equipment or any other

equipment.

3. Direct the remote control towards your equipment

and try to switch it off by simply pressing the key G.

If the device does not turn off, you must program the

remote control using one of the methods A, B, C or

D described hereafter.

Note 1: Except for the TV key, the DVD, SAT/

STB and AMP mode keys can be programmed

to control a device other than that indicated on the

key. It is therefore possible, for example, to allocate

SAT mode to the DVD key. You must enter the code

corresponding to the manufacturer and the device by

using one of the methods indicated in this manual.

However, method D (automatic search for a code)

will greatly simplify the task for you. In this case it

is only necessary to enter a code from the list that

corresponds to the type of device, for example: 0603

for a Thomson satellite receiver) and then to run the

automatic search procedure. The remote control will

then test all the codes automatically until it ﬁ nds those

that control the receiver.

Note 2: To control 2 devices of the same type and the

same brand (2 Thomson VCRs, 2 Thomson satellite

receivers, ...) ensure ﬁ rst that these two devices are not

set to react to the same sub code, they will require one

sub code for one and a different sub code for the other

(i.e., codes A and B with Thomson devices). Once you

have checked this, successively program 2 separate

mode keys using method D.

Programming

the remote control

Method A – Fast programming

with 1-digit subcode

Before you start programming, you must ﬁ nd the

subcode of the set to be controlled. Entering a subcode

lets the remote control test a predeﬁ ned list of codes.

Refer to the list provided with these instructions, page

I of the subcodes.

1. Switch on the set you want to control.

2. Hold down the SETUP key until the indicator lamp

blinks and then remains lit (the indicator light

remains on for a few seconds to give you the time to

proceed with the following steps. The indicator lamp

ﬂ ashes to signal that this time is almost up, and then

goes off).

Press the key that corresponds to the type of equipment

you want to control: TV: television set, DVD: DVD

player, , SAT/STB: satellite receiver, cable, DVBT,

ADSL, AMP: AUDIO equipment and any other

appliance.

4. While the indicator is lit, type in the subcode

(example: 1 for THOMSON).

5. Direct the remote control towards the set and try to

switch it off by pressing the key G.

6. If the set you want to control switches off, press OK

to memorise the code.

7. Should the set not switch off, press key G repeatedly,

until the set switches off. Between two key presses,

leave enough time for the indicator lamp to light up

again (about 1 second). Proceeding this way will

enable you to see whether the set responds or not.

8. Immediately upon the switching-off of the set to be

controlled, press OK to store the code.

2021

Characteristics - Caractéristiques - Eigenschaften - Características

Caratteristiche - Características - Технические характеристики -

Eigenschappen - Dane techniczne - Karakterisztika - χαρακτηριστικά

Technické údaje - Charakteristiký - Karakterisitik - Data -

Ominaisuudet - Caracteristică

Dimensions - Dimensions - Abmessungen - Dimensiones - Dimensioni

- Dimensões -

размеры - Afmetingen -

Wymiary

Méret -

Διαστάσεις

- Rozměry

- Rozmery - Boyutlar - Mått - Mitat - Dimensiuni

= 214 x 45 x 24 mm

Weight = 86 grammes

Poids = 86 grammes

Gewicht = 86 Gramm

Peso = 86 gramos

Peso = 86 grammi

Peso = 86 gramas

вес = 86 грамм

Gewicht = 86 gram

Ciężar = 86 g

Súly = 86 gramm

Βάρoς = 86 γραμμάρια

Hmotnost = 86 g

Váha = 86 gram

Ağırlık = 86 gram

Vikt = 80 gram

Paino = 86 grammaa

Greutate = 86 gram

AAA

1 Mode keys : Select the device to control (TV, DVD, …).

2 : On/Standby or Standby only, depending on the equipment being used.

3 Learn : Used for the learning codes procedure (key copying) (see page 3).

4 Macro : Macro selection (see page 4).

5 : Teletext On.

: Teletext hold.

: Teletext Mix.

: Teletext Off.

6 Setup : Allows you to program your remote before the ﬁ rst use. It also allows you

to access to secondary functions of certain A/V appliances (Shift). Press and

release the “Setup” key followed by the function key you want.

7 i : Displays information of the selected appliance.

8 P<P : Previous channel.

9 Wide : Change the size of the image (4/3, 16/9, etc...).

10 Coloured keys : Can be used to select categories when teletext is activated, and speciﬁ c

functions depending on the make.

/ / / : Allow you to navigate the menus horizontally and verticaly.

OK : Conﬁ rms a selection.

12 Exit : Turn off the menu of the selected product.

13 Menu : Turns on the menu of the selected product.

14 CH /CH : Channel Up and Channel Down buttons.

15 Guide : Electronic Program Guide.

16 (Mute) : Switches the selected appliance sound off.

17 Vol+/Vol- : Increases (+) or decreases (-) the volume of the selected device.

18 (Play) : Play a DVD disc (DVD, ...).

(FF) : Fast forward (DVD, ...).

(RW) : Goes backward (DVD, ...).

(Pause) : Suspends play and stops on an image.

(Stop) : Stop the disc (DVD, ...).

(Record) : To record, press the RECORD key twice.

19 Numeric keys 0-9 :

These keys have the same functions as those of your original remote and are

also used to enter the codes for different products. Selection of a macro (M1, M2, M3

)

20 -/-- : Access to channel > 9 and Radio selection depending of the device.

21 AV : For selecting an external source (SCART, HDMI, ...).

The keys

This universal remote control (4 in 1) is compatible with the majority of television sets, DVD

players and video recorders, ampliﬁ ers and Hi-Fi and Home Cinema systems, as well as

digital boxes such as satellite or cable receivers, DVBT receivers (Digital Video Broadcast

Terrestrial), ADSL decoders, and so on. This remote control was programmed in the factory,

so that you can use it to control most of the sets of the THOMSON group’s make. For this

reason, we recommend that prior to attempting to programme the remote control, you try it

out by means of one of the methods described in this user manual. However, ﬁ rst of all, you

must install 2 batteries (AAA) in the remote control.

Please keep this guide along with the code list (provided separately), so that you can

subsequently programme your remote control for use with other sets.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hama 44611 easytip 1 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hama 44611 easytip 1 Manual

Product: