607816

Hama 40098 - 8in1 Manual

8
Zoom out
Zoom in
Previous page
1/30
Next page
14
15
• Press and hold the Mute (17) button until
the red LED briefl y goes out.
• Press a source button for the device to
which the volume and mute functions are
to be transferred. The red LED stays on.
• Press the Mute (17) button; the red LED
goes out.
• If you accidentally select a device which
does not have its own volume control, the
red LED fl ashes for 3 seconds.
Programming volume/mute to a specifi c
device type
• Press and hold the Setup (16) button
for approx. 3 seconds until the red LED
remains lit.
• Press and hold the Mute (17) button until
the red LED briefl y goes out.
• Press the source button for the device
which is only to have its own volume and
mute functions.
• Press the “-” Volume (7) buttons; the red
LED stays on.
• Press the Mute (17) button again; the red
LED goes out.
Resetting volume/mute
If you have changed the volume and mute
as described in the previous two sections,
you can reset these functions to their factory
settings and thereby restore the “punch
through” function.
• Press and hold the Setup (16) button
for approx. 3 seconds until the red LED
remains lit.
• Press and hold the Mute (17) button until
the red LED briefl y goes out.
• Press the Mute (17) button again; the red
LED goes out.
The volume and mute “punch through” func-
tions are now returned to their default state.
Debugging
The remote control does not function:
• Check the batteries of the remote control
are correctly inserted and the polarity
+/- is right
• Check your devices are correctly
connected and turned on.
• If the batteries are too weak, you
exchange these through new.
• Several device codes are performed under
the brand name of my device. How do I
determine the correct device code?
• In order to determine the correct device
code for your device, you try out the
codes after each other until most
functions of the device function properly.
The devices react only to some commands of
the remote control:
• You test further codes, to which according
to devices by the commands react.
• If the manual code input and the automatic
code search do not lead to the success,
it can happen in special individual cases
that the device is not compatible to your
universal remote control.
Télécommande universelle
Touches de fonction
1. Power : SOUS / HORS TENSION
2. Affi chage DEL
3. Touches de sélection de l’appareil
4. Touches numériques bloc 0-9
5. AV : commutation vers l’appareil externe
6. -/--: commutation vers les numéros de
programmes à deux chiffres
7. V+/V– : réglage du volume
8. P+/P– : sélection du programme
9. Bague pour la navigation dans les menus de
l’écran
10. OK : confi rmation de saisies
11. E retour rapide / voyant rouge
B lecture / voyant jaune
F avance rapide / voyant bleu
I démarrage d’un enregistrement
K Stop / voyant vert
J pause / voyant magenta
12. EXIT : pour quitter le menu de l’appareil
13. EPG : consultation du guide électronique
des programmes (dépend du modèle
d’appareil)
14. Consultation des fonctions de l’écran
15. Menu : ouverture du menu de l’appareil
16. Setup (réglage)
17. H Commutation en mode silencieux
18. Learn (apprentissage) :
apprentissage des touches d’appareils
Remarques générales
Cette télécommande universelle est une
télécommande 8 in 1 capable de piloter les
types d’appareils suivants : TV, STB, CBL,
AUDIO, AUX, VCR, CD, DVD (enregistreur
DVD/lecteur, magnétoscope, amplifi cateur,
récepteur radio, etc.).
L’inscription des touches ne désigne pas
l’appareil que vous désirez programmer, mais
est utilisée uniquement afi n de faciliter la vue
d’ensemble.
Veuillez noter les codes de vos appareils
que vous avez utilisés lors de la
programmation.
Vous ne perdrez ainsi pas de temps lors
d’une nouvelle programmation de la
télécommande en cas de perte de
l’enregistrement des codes (après un
changement de batterie, par exemple).
Vous devez programmer sur une touche
source (TV, STB, CBL, AUDIO, AUX, VCR,
CD, DVD) avec un code à quatre chiffres
chaque appareil que vous désirez piloter à
l’aide de la télécommande universelle.
Magnétoscope : recherchez le code avec
une cassette insérée.
Programmation des codes des appareils
Saisie du code de l’appareil selon la liste de
codes
Veuillez consulter la liste de codes jointe
au mode d’emploi pour trouver le code
correspondant à votre appareil.
• Mettez l’appareil que vous désirez utiliser
sous tension manuellement.
• Appuyez brièvement sur la touche de la
source désirée (TV, STB, CBL, AUDIO,
AUX, VCR, CD, DVD).
• Maintenez la touche Setup (16) enfoncée
pendant environ 3 secondes, jusqu’à
ce que la DEL rouge s’allume en
permanence.
• Saisissez ensuite le code à quatre chiffres
correspondant à partir des codes de la
liste.
• La DEL s’éteint brièvement afi n de
confi rmer la saisie de chaque position.
• La DEL rouge s‘éteint après la saisie de la
dernière position dans le cas où le code
saisi est correct.
• Appuyez brièvement sur la touche OK (10)
afi n de sauvegarder le code.
f
Mode d‘emploi
00040098bda.indd Abs1:14-Abs1:1500040098bda.indd Abs1:14-Abs1:15 08.10.2009 10:24:55 Uhr08.10.2009 10:24:55 Uhr
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama 40098 - 8in1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama 40098 - 8in1 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info