607814

Hama 40092 - 2in1 Zapper Manual

3
Zoom out
Zoom in
Previous page
1/10
Next page
4
5
g
Operating Instructions
Universal Zapper Remote Control
Function buttons
1. Power: Switch your device on/off
2. LED: lit whenever a key is pressed
3. TV
4. STB (Satellitenreceiver / Set Top Box)
5. V+/V– : volume control
6. P+/ P- : Zapping control
7. H Mute
8. AV: External TV/VIDEO sources
9. „Info“ key
10 . Return to channel 1
Direct code input
To directly input the code read from the list:
• Switch your device on.
• Select the device you like to program (TV,
STB) .
• Hold down keys Mute (7) and the Power
(1) until the red indicator lamp remains lit.
• While the indicator lamp is on.
• P+ : 1 st number
• P- : 2nd number
• V+ : 3rd number
• V- : 4th number, enter the 4-digit code
• EXAMPLE: enter code 0027, do not press
the keys PROG+ and PROG-, press VOL+
twice and VOL- seven times. The red
indicator lamp fl ashes whenever a key is
pressed.
• To save the code, press key Mute (7) . The
red indicator lamp goes off.
• Should the code entered not be on the
list; the red indicator lamp fl ashes rapidly
during 3 seconds and then goes off.
Code check: Direct the remote control
towards the TV and try to switch it over to
standby by simply pressing the key.
Automatic code retrieval
• Switch your device on.
• Select the device you like to program (TV,
STB) .
• Direct the remote control towards the TV
and try to switch it off by simply pressing
the key Power (1). Should the set not
switch off, press Power (1) as many times
as required (up to 300 times), until the set
switches off. Between two subsequent
key depressions give the red indicator
lamp enough time to extinguish and light
up again (about 1 second). Proceeding
this way will enable you to see whether
the set responds or not.
• Immediately after the TV switches over to
standby, press key Mute (7) to store the
programming. The red indicator lamp goes
off
Retrieval of the code stored in your remote
control
When you have retrieved the code of
your set, jot it down so that you can use it
whenever needed.
After battery replacement, you‘ll have to
program the remote control again.
• Switch your device on.
• Select the device you like to program (TV,
STB) .
• Hold down keys Mute (7) and the Power
(1) until the red indicator lamp remains lit.
• Press key V-.
• To visualize the
• fi rst code digit, press P+ and count the
Rash pulses of the red indicator lamp.
The digit „0“ does not generate any Rash
pulse.
• For the second code digit, press key
P- and count the Rash pulses of the red
indicator lamp.
• For the third code digit, press key V+ and
count the Rash pulses of the red indicator
lamp.
• For the fourth code digit, press key V- and
count the Rash pulses of the red indicator
lamp. The indicator lamp extinguishes
after the last Rash.
• When you have retrieved the code of
your set, jot it down so that you can use it
whenever needed.
00040092bda.indd Abs1:4-Abs1:500040092bda.indd Abs1:4-Abs1:5 08.10.2009 10:24:24 Uhr08.10.2009 10:24:24 Uhr
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama 40092 - 2in1 Zapper at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama 40092 - 2in1 Zapper in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info