607808

Hama 20320 - Zapman 4in1 Manual

1
Zoom out
Zoom in
Previous page
1/2
Next page
1
Deutsch
UNIVERSAL REMOTE CONTROL
Thank you for purchasing this universal remote control. Before using the remote you will need to
insert 2 type "AAA" batteries (not included) in the battery compartment ensuring that you follow the
polarity shown on the inside. You can now use your remote control to operate TV set!
Easy programming for the control of your TV SET
1. Insert 2 new 1.5V alkaline batteries of type "AAA/LR03". Observe battery polarity as indicated in
the battery compartment.
2. Switch on your TV SET.
3. In the enclosed code list, find your TV brand or manufacturer (e.g. Sony).
4. Beside the manufacturer's name, you will find one or more 3-digit codes. These codes must be
entered into the remote to enable it to work with your particular TV set.
5. Simultaneously press the and the key on the remote control for approximately 4
seconds until the LED flashes twice.
6. After seeing the 2 flashes and within 5 seconds, enter the 3-digit numerical code from the list.
7. After entering the code the LED will flash twice indicating that the code has been accepted.
8. Point the remote control towards your TV and press the key. If your TV does not respond by
going into Stand-By mode then repeat steps 3 to 8 and enter the next code in the list.
9. If your TV goes into Stand-By mode when the key pressed then your remote control has
found a compatible code. Next test all of the other function buttons. If certain functions are not
working correctly then restart the process moving onto the next code number as this may well
improve the situation.
10. If the codes in the list fail to operate your TV then next move onto the automatic code scan
function (see below).
Code scan
If programming using the codes in the enclosed list failed to work then you must next try the
automatic code scan.
A. Ensure that the remote control is equipped with 2 new batteries (see step one of easy
programming procedure).
B. Switch on your TV SET.
C. Simultaneously press the and the key on the remote control for approximately 4
seconds until the LED flashes twice.
D. After seeing the 2 flashes and within 5 seconds, enter the code . After entering the code
the LED will flash twice indicating that the code has been accepted
E. Press and hold the key until your TV switches off. Please note that this process might take
up to 15 minutes. During the automatic scanning you can remove your finger or change hands
provided it is replaced within 8 seconds. If left off of the key for more than 8 seconds then the
remote will revert back to its normal mode. If your TV switches into Stand-By mode during the
automatic process then immediately remove your finger from the key and then press the
and the key until the LED flashes twice, this will then store the code that the remote
control has found.
F. In some cases during the automatic scanning search the remote control might find several codes
that appear to operate your TV etc, however, if some of the buttons fail to work properly then it’s
possible the remote has found a partially compatible code. In such cases you will need to restart
the automatic scanning process (steps B. to F.) until a better code is found. Please note that
once the automatic process is restarted, the remote continues from the last stored code and not
at the beginning of code database.
Finding out what code number you are using
If you have programmed your remote control by means of the automatic code scan, or if you have
forgot the code you have stored then the following procedure will replay the codes being used.
A. Simultaneously press the and the key on the remote control for approximately 4
seconds until the LED flashes twice.
B. Enter code , using the numerical keys. The LED flashes twice.
C. Press key and count the number of LED flashes. This number corresponds to the first digit of
the code.
D. Press key and count the number of LED flashes. This number corresponds to the second digit
of the code (if the digit is 0, the LED does not flash).
E. Press key and count the number of LED flashes. This number corresponds to the third digit of
the code (if the digit is 0, the LED does not flash).
F. Steps C, D and E can be repeated as often as necessary.
Write down the code number as indicated by the LED.
3
2
1
2
0
0
TV
TV
1
0
0
TV
TV
USER MANUAL
GB
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama 20320 - Zapman 4in1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama 20320 - Zapman 4in1 in the language / languages: English as an attachment in your email.

The manual is 0,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama 20320 - Zapman 4in1

Hama 20320 - Zapman 4in1 User Manual - German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info