607800
2
Zoom out
Zoom in
Previous page
1/4
Next page
2
Deutsch
Code scan Function
If programming using the direct codes failed to operate your TV, VCR or
Satellite then please use the automatic code scan which often finds compatible
codes from other brands or other models within your brand.
A. Switch on your TV SET. When scanning for a VCR code, switch on the
video recorder and start playing a videotape (i.e. start the play function on
the VCR).
B. Set the disk to position and press the key on your remote control
(for approx. 4 seconds) until the LED flashes twice.
C. Enter code 1 1 1 1 (i.e. press ). The LED flashes twice.
D. Press and hold the key until your TV SET is switched off. This
procedure might take up to 15 minutes (when searching for a VCR code,
press and hold the key and not the key).
E. If the device responds by going into standby or the VCR tape stops then
immediately remove your finger from the relevant key and immediately
press the key, this will store the found code into the remote and the LED
flashes twice.
F. When using the Automatic mode it is possible that the remote will find
several codes that appear to work although these might not give 100%
compatibility. If this happens then restart the Automatic mode and move
onto the next code. Please be patient as it might be necessary to scan
through many different codes until a suitable one is found.
Code scan for VCR or SAT
To complete a code scan for VCR or SAT, proceed as described for a TV code
scan. Set disk to position or respectively and complete the above
steps A to F.
At step D, press the key for SAT and the key for VCR.
Reading of currently set code
If you have programmed your remote control by means of a code scan, or if
you do not remember the code you have entered, you have the option to read
the currently used code.
A. Set the disk to position and press the key on your remote control
(for approx. 4 seconds) until the LED flashes twice.
B. Enter code 1 1 1 2 (i.e. press ). The LED flashes twice.
C. Press the key and count the number of LED flashes. This number
corresponds to the first digit of the code.
D. Press the key and count the number of LED flashes. This number
corresponds to the second digit of the code.
E. Press the key and count the number of LED flashes. This number
corresponds to the third digit of the code.
F. Press the key and count the number of LED flashes. This number
corresponds to the fourth digit of the code.
G. Steps C, D, E and F can be repeated as often as necessary.
To read the currently used VCR or SAT code, proceed as described above for
your TV SET. Set disk to position or respectively and complete the
above steps A to G.
Write down the code number as indicated by the LED.
SAT
VCR
OK
F
SAT
VCR
F
F
USER MANUAL
GB
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama 20301 - Easytip Z3 Universal Zapper at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama 20301 - Easytip Z3 Universal Zapper in the language / languages: English as an attachment in your email.

The manual is 0,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama 20301 - Easytip Z3 Universal Zapper

Hama 20301 - Easytip Z3 Universal Zapper User Manual - German - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info