607799
1
Zoom out
Zoom in
Previous page
1/4
Next page
1
Deutsch
UNIVERSAL REMOTE CONTROL
Thank you for purchasing this remote control. Please insert 2 type "AAA"
batteries in the battery slot. You can now use your remote control to operate up
to 3 different devices (depending on the model you purchased): television set,
video recorder, satellite receiver and cable box!
Easy programming for the control of your TV SET
1. Insert 2 new 1.5V alkaline batteries of type "AAA/LR03". Observe battery
polarity as indicated in the battery slot.
2. Switch on your TV SET.
3. In the enclosed code list, find the name of the manufacturer of your TV SET
(e.g. Sony).
4. Beside the manufacturer's name, you will find one or more 4-digit codes.
These codes must be entered into the remote in order to programme it for
your specific TV set.
5. Set the disk to position and press the key on your remote control
(for approx. 4 seconds) until the LED flashes twice.
6. Enter the 4-digit numerical code from the list (e.g. code for Sony). Code
entry must be completed in 5 seconds or the remote will cancel the
programming operation. To enter the code, use the following keys:
.......... 1
.......... 2
.......... 3
.......... 4
.......... 5
7. After entering the code successfully the LED will flash twice, indicating that
the code has been accepted.
8. Point the remote control toward your TV SET and press the key. If the
TV SET switches off then your remote has found a compatible code, howe-
ver, it is possible that some functions might not operate correctly. If this
happens then move onto another code to see if it improves the situation.
9. If your TV SET does not respond when you press the key, repeat
above steps 3 to 8 and enter the next code in the list.
10. If none of the manufacturer codes in the list are suitable for the control of
your TV SET, use the code scan function.
Easy programming for the control of your VIDEO
RECORDER
To programme the remote control to operate your VIDEO RECORDER, proceed
as described above for the television set. Set the disk to position and
complete above steps 1 to 10. For TV SET, ensuring that you use the codes
from the VIDEO RECORDER section of the code book.
Easy programming for the control of your SATELLITE
RECEIVER
To programme the remote control to operate your SATELLITE RECEIVER or
CABLE BOX, proceed as described for the television set. Set the disk to
position and complete above steps 1 to 10. For TV SET, ensuring that you
use the codes from the SATELLITE RECEIVER section of the code book.
SAT
VCR
OK
F
TV
USER MANUAL
GB
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama 20300 - Easytip Z1 Universal Zapper at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama 20300 - Easytip Z1 Universal Zapper in the language / languages: English as an attachment in your email.

The manual is 0,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama 20300 - Easytip Z1 Universal Zapper

Hama 20300 - Easytip Z1 Universal Zapper User Manual - German - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info