683780
3
Zoom out
Zoom in
Previous page
1/30
Next page
1
Proper Use
The Hakomatic E 430 vacuum scrub-
bing machine has been exclusively de-
signed for floor cleaning, such as wet
scrubbing.
Whatever sort of use beyond the spe-
cified range will be deemed improper
use; the manufacturer cannot be held
liable for consequential damages.
The term of proper use also includes
compliance with the manufacturer's in-
structions about operation, maintenan-
ce and repair.
The Hakomatic may be used, serviced
and repaired by persons only that are
familiar with the machine and are awa-
re of possible hazards involved.
The appropriate Accident Prevention
Regulations as well as the applicable
general regulations about safety and
health at work will have to be complied
with. Modifications made to the
Hakomatic E 430 in absence of the
manufacturer's consent will relieve the
manufacturer from a possible liability
for consequential damage.
Caution! This machine is not suitable
for evacuation of dusts, which are ex-
plosive or dangerous to health.
Notes on warranty
The terms of the sales contract apply.
Damages are not subject to warranty if
they are due to non-compliance with
the maintenance and service provi-
sions. Any maintenance work has to
be performed by an authorized Hako
service workshop and confirmed in the
"Maintenance certificate" which is the
warranty document.
The following is excluded from
warranty:
Natural wear and tear after overload,
fuses and damages caused by inex-
pert handling and unauthorized
modification of the machine.
Moreover, any claim for warranty beco-
mes extinct if damages at the machine
are caused by fitting of parts or acces-
sories without Hako's prior and explicit
consent or by non-compliance with the
maintenance instructions.
Acceptance of the machine
Upon arrival, check your consignment
for possible transit damage. Please
have the railway authorities or the
freight forwarder confirm such damage
and mail your report and waybill to:
Unsere Anschrift :
Hako GmbH
Hamburger Strasse 209-239
23843 Bad Oldesloe
Introduction
1
Proper Use
The Hakomatic E 430 vacuum scrub-
bing machine has been exclusively de-
signed for floor cleaning, such as wet
scrubbing.
Whatever sort of use beyond the spe-
cified range will be deemed improper
use; the manufacturer cannot be held
liable for consequential damages.
The term of proper use also includes
compliance with the manufacturer's in-
structions about operation, maintenan-
ce and repair.
The Hakomatic may be used, serviced
and repaired by persons only that are
familiar with the machine and are awa-
re of possible hazards involved.
The appropriate Accident Prevention
Regulations as well as the applicable
general regulations about safety and
health at work will have to be complied
with. Modifications made to the
Hakomatic E 430 in absence of the
manufacturer's consent will relieve the
manufacturer from a possible liability
for consequential damage.
Caution! This machine is not suitable
for evacuation of dusts, which are ex-
plosive or dangerous to health.
Notes on warranty
The terms of the sales contract apply.
Damages are not subject to warranty if
they are due to non-compliance with
the maintenance and service provi-
sions. Any maintenance work has to
be performed by an authorized Hako
service workshop and confirmed in the
"Maintenance certificate" which is the
warranty document.
The following is excluded from
warranty:
Natural wear and tear after overload,
fuses and damages caused by inex-
pert handling and unauthorized
modification of the machine.
Moreover, any claim for warranty beco-
mes extinct if damages at the machine
are caused by fitting of parts or acces-
sories without Hako's prior and explicit
consent or by non-compliance with the
maintenance instructions.
Acceptance of the machine
Upon arrival, check your consignment
for possible transit damage. Please
have the railway authorities or the
freight forwarder confirm such damage
and mail your report and waybill to:
Unsere Anschrift :
Hako-Werke GmbH
Hamburger Strasse 209-239
23843 Bad Oldesloe
Introduction
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hako Hakomatic E 430 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hako Hakomatic E 430 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info