Manual Habitat IONFLOW 50 (page 5 of 44) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

478217

Zoom out

Zoom in

1/44

4: Finally, plug the transformer cable into the switch plug in

the transformer plug

The indication light should light up. Congratulations!

From now on, you are breathing cleaner air.

5: To switch the IonFlow 50F & 50F Style on and off:

• Air purier ON (upper indication light on) & decorative light

OFF

• Air purier ON (upper indication light on) & decorative light

• Air purier OFF (upper indication light off) & decorative

light OFF

6: The decorative lights can be changed easily.

4B. Assembly and installation of 50C

S E E P I C T U R E S O N PA G E 3 3

Assemble the air purier in the following order:

For ceiling installation: Drill an 8mm hole in the ceiling to

attach the wall plug and ceiling hook. Insert the plug into the

hole and screw in the ceiling hook.

For suspended ceilings: Consult an electrician for the most

appropriate solution

NB. Ensure that the distance from the wall to the air purier

is at least 3 feet / 1 metre

A-D: Thread the cable through the loops of the pressure

relief device.

E-F: Attach the pressure relief device to the top of the ion

generator (at the outlet on the plastic tube) and ensure that it

snaps into the holes

G: Connect the plug to socket on the ion generator

H: Attach the cable to the pressure relief hook. The air puri-

er should hang down at least 2 feet / 60 cm from the ceiling

I: Hang the pressure relief hook from the ceiling hook

J-K: Hold the metal hook on the ion generator. Then care-

fully lift the collector (aluminium cylinder) from underneath

(where the corona needles are) up and over the metal hook

L: Then let the collector slide back down and rest on the

metal hook. NB. This connection is vital in order for the air

purier to function.

• Finally, plug in the transformer plug at the wall socket. If

an extension lead is required, attach this to the transformer

cable.

The indication light should light up. Congratulations!

From now on, you are breathing cleaner air.

5. Cleaning and maintenance

• Always unplug the transformer plug before cleaning the air

purier.

• Do NOT wash the collector in the dishwasher.

• Do not use cleaning products that contain alcohol solutions,

ammonia or alkaline substances, as these products may

damage the air purier.

• The collector should be cleaned around once a week or as

and when required. The collector may require more frequent

cleaning if used in highly contaminated environments.

Cleaning the collector:

IonFlow 50F & 50F Style: Remove the collector by lifting up

the ion generator with the collector attached. Then hold in

the metal hook and pull the collector downwards (pictures

1-3 on page 32, in reverse). NB. The ion generator may be

damaged if you pull it upwards!

IonFlow 50C: Hold in the metal hook on the ion generator

and move the collector down (pictures J-L on page 33, in

reverse)

1. Clean the collector with washing-up liquid, warm water

and a soft sponge/dish brush

2. Dry the collector with a dishtowel

3. Put the collector back on the ion generator according to

the earlier instructions.

If you have followed all the above instructions but the col-

lector is not clean, try the following:

1. Spray cleaning uid onto the collector and let it work for

5 minutes

2. Using a damp sponge, rub any remaining spots until they

disappear

3. Wipe the collector using a clean, damp sponge

4. Dry the collector with a towel and place it back on the ion

generator according to the earlier instructions.

5. Repeat the above procedure if necessary

Cleaning the ion generator, corona needles and acrylic

stand:

• Once every four months you may need to carefully clean

the fragile corona needles. Use a small brush (e.g. a

toothbrush) and carefully brush away the thin layer of white

lime scale and dirt which may have become attached to the

needles. Do not use pressure or water when you clean the

needles.

• Clean the ion generator and the acrylic stand with cleaning

spray and a damp cloth or sponge. Wipe clean and rub away

any remaining dirt. Dry with a towel. Do not allow the top and

bottom to come into contact with water and be careful with

the corona needles on the ion generator.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Habitat IONFLOW 50 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Habitat IONFLOW 50 Manual

Product: