811968
2
Zoom out
Zoom in
Previous page
1/10
Next page
Art. Nr.182223
V02G30
Brandschutz-Isolierset Strassburg
Montageanleitung
1 WICHTIGE VORBEMERKUNG
Um eine unzulässige Wärmeeinwirkung auf brennbare oder statisch empfindliche Bauteile (z.B.
Holzwände oder tragende Wände aus Stahlbeton) zu verhindern, sind diese vor übermäßiger
Erwärmung zu schützen. Zur Abschirmung verwenden Sie hierzu das Brandschutz-Isolierset
(bestehend aus verschiedenen Schirmblechen). Dieses Brandschutz-Isolierset muß bei brennbaren
bzw. statisch empfindlichen Wänden unbedingt montiert werden! Unsere Empfehlung ist, dieses
Brandschutz-Isolierset auch bei nicht brennbaren Wänden zu verwenden.
2 BESTANDTEILE DES BRANDSCHUTZ-ISOLIERSETS
Artikelnr. Anzahl Bezeichnung Artikelnr. Anzahl Bezeichnung
1824023 2 Rückwandschirmblech 1821203 1 Isoliermatte
1805973 3 Aufnahmebolzen 1804363 4 Clip A
1823993 1 Aufsatzblech vorne 1817313 2 Abdeckbleche
1824003 1 Aufsatzblech hinten 1803553 4 Linsenblechschrauben 3,5x9,5
1823983 2 Abstandsprofil
3 MONTAGE DER RÜCKWANDSCHIRMBLECHE AM HEIZEINSATZ
Zur Montage der Rückwandschirmbleche darf die Kunststeinverkleidung noch nicht aufgebaut sein.
1. Schrauben Sie die drei Aufnahmebolzen auf die
Gewindebolzen an der Rückwand des Heizeinsatzes auf
(siehe Bild 1).
2. Brechen Sie bei beiden Rückwandschirmblechen das Loch
für die Rauchrohrdurchführung aus (Perforation), so daß die
Rauchrohre hindurchgeführt werden können.
3. Verbinden Sie die Aufsatzbleche mit den
Rückwandschirmblechen, indem Sie beide Laschen der
Aufsatzbleche um 90°C abwinkeln (siehe Bild 2) Dann die
Aufsatzschirmbleche mit den abgewinkelten Laschen in die
Schlitze des Rückwandschirmblechs stecken (links sowie
rechts) und Laschen vollständig umbiegen (siehe Bild 3).
4. Hängen Sie danach beide Rückwandschirmbleche an den
Aufnahmebolzen ein (für jedes ist eine Nut vorhanden) wobei
als erstes das Blech mit dem Aufsatzblech vorne (klein)
eingehängt wird. Dabei zeigen die abgewinkelten Seiten
nach vorne (siehe Bild 4 und 5).
5. Zum Abschluß müssen noch die beiden Abstandsprofile in
die Aufsatzbleche eingeschoben werden bis sie einrasten
(siehe Bild 6,7 und 8).
4 RAUCHROHRISOLIERUNG
Bild 1
Nach dem Anschluß an den Schornstein (Kamin, Rauchfang) muß das Rauchrohr im Bereich zwischen
Raumwand und Rückwandschirmblech rundherum mit der beigelegten Isoliermatte umwickelt werden.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn Strassburg at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn Strassburg in the language / languages: German as an attachment in your email.

The manual is 0.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info