811999
2
Zoom out
Zoom in
Previous page
1/7
Next page
2
Table of contents
Congratulations! You are the owner of a HAAS + SOHN
chimney stove, a quality product. Please read this Operating
Manual carefully. In it you will find information concerning the
operation and handling of this stove to increase the practical
value of the appliance and extend its service life; in addition you
can save fuel and protect the environment through correct
heating. The enclosed Equipment Sheet is part of this Operating
Manual.
We can only provide guarantee for our products if you adhere to
the following guidelines of this Installation and Operating
Manual.
Keep this Manual with the Equipment Sheet in a safe place so
that you can re-familiarise yourself with the correct operation of
your stove at the beginning of each heating season.
1. Description
Chimney stoves are highly suitable for the heating of living and
working rooms.
The stove body consists of a welded steel structure. A wood
storage compartment is located at the bottom below the ash pan,
above which is the firebox and a warming compartment on top.
The flue gas drafts are arranged above the firebox between the
warming compartment and the inner stove rear wall.
Heating of the room air and creation of a comfortable living
climate is largely achieved through convection heat. In this way
it is possible to rapidly heat even cool rooms that have not been
heated for a long time. The room air enters the stove in the wood
storage compartment, is heated while rising in the convection
duct between inner body and outer wall, exiting through openings
provided at the top of the stove. The component of radiation heat
is obtained through heat radiation in the area of the view window
of the firebox door, from the metal surfaces of the stove and if
available from the ceramic surfaces on the side walls.
2. General instructions, safety instructions
National and European standards, local and building law
regulations as well as regulations by the fire prevention
authorities must be adhered to. The regulations from the fire
protection authorities or the national building regulations
applicable at the place of installation must be observed when
installing your stove; installation should also be discussed with
the responsible master chimney sweep. The latter will also check
the correct connection of the appliance to the chimney.
Prior to installation, ensure that the sub-structure is capable of
carrying the chimney stove. If the load capacity is insufficient,
suitable measures (for instance a slab for load distribution) will
have to be taken to satisfy this requirement.
All tests ordered by the legislator have been conducted for your
wood stove which meets the specified characteristics in terms of
technical fire efficiency and flue gas emission.
Your wood stove of Type 1 (BA 1) described in this manual has
been tested according to EN13240. (“Chimney stoves for solid
fuels”). The chimney stoves of Type 1 (see appliance nameplate)
may be connected to a multiple-connection chimney if the
chimney dimension according to DIN 4705 Part 2 allows this.
The wood stove is a slow-combustion fireplace.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn i2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn i2100 in the language / languages: English as an attachment in your email.

The manual is 0.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn i2100

Haas-Sohn i2100 User Manual - German - 7 pages

Haas-Sohn i2100 User Manual - French - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info