Manual H.Koenig JOE50 (page 3 of 25) (English, German, Dutch, French, Italian, Spanish)

701180

Zoom out

Zoom in

1/25

INSTRUCTIONS

1. Before power is supplied to the fan, ensure that the

voltage and frequency is the same as the nameplate.

2. Assembling the guard and the blades.

2.1. It is fixed the back guard on the motor by the mounting

screw.

2.2. It is loosened the cap nut. Fixes the blades on the rotor

shaft by locked the blade's screw. Finally locked the cap

nut into the rotor shaft.

2.3. It is fixed the front guard on the back guard by locking

the guard's screw.

3. The switch has for buttons numbered 0, 1, 2 and 3,

including off, slow,

medium and fast, respectively.

4. The oscillation switch controls the swing of the fan.

ATTENTIONS

1. Unplug the fan before maintenance. Do not touch the

fan if your hands are wet.

2. Do not connect to main power supply or switch on the

fan before assembly is completed.

3. Those who are not qualified electricians should not

disassemble, repair or rebuild the fan.

4. Unplug the fan when it is not being used.

5. Do not unplug the fan by holding the wire.

6. Do not use the fan if the wire or plug has been

damaged, or if the power socket is loose.

7. Do not repair the fan when the wire is damaged.

8. Do not use the fan near any of the following: gas stove

or any fire source, unusually humid or high temperatures,

oil soot with a lot of metal powder, or unstable places not

good for oscillation.

9. Do not insert your hand into the guard, or movable

parts.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of H.Koenig JOE50 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

H.Koenig JOE50 Manual

Product: