Manual H.Koenig GS8 (page 3 of 49) (English, German, Dutch, French, Italian, Spanish)

701166

Zoom out

Zoom in

1/49

F. Driving Shaft (do not remove)

G. Motor Unit

H. Spout

I. Control Knob

J. Clamps

K. Pulp Container

PREPARING FOR USE

1. Ensure your glass or pitcher sits under the spout to collect the juice.

2. Place the pulp container into the appliance by tilting it forwards slightly. Insert the top end first and then

push down the bottom end.

3. Place the juice collector into the appliance. Make sure the rim is flush with the motor unit.

4. Put the filter in the juice collector. Ensure the filter is fitted securely onto the driving shaft. The blade should

sit below the rim of the pulp container when in place.

5. Hold the lid over the filter and lower it into position.

6. Snap the two clamps onto the lid to lock it in place (you will hear a click noise). Note. Ensure that both

clamps are secured properly.

7. Slide the pusher into the feeding tray by aligning the groove in the pusher with the small protrusion on the

inside of the feeding tube.

8. Control Knob. Off (O) – Low (1) – High (2)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of H.Koenig GS8 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

H.Koenig GS8 Manual

Product: