625805
14
Zoom out
Zoom in
Previous page
1/18
Next page
GB.14-V1
RIPPLE DETECTED
××.××V NORMAL
NO RIPPLE DETECT
AND PRESS ENTER
7.
Following the charging system
at idle, press <ENTER> for the
charging system with
accessory loads. Turn on the
blower to high (heat), highbeam headlights, and rear
defogger. Do not use cyclical loads such as air
conditioning or windshield wipers.
8.
When testing older model
diesel engines, the users need
to run up the engine to 2500
rpm for 15 seconds. You will
view the screen as follows:
9.
Press <ENTER> to look for the amount of ripple from
the charging system to the battery. One of two testing
results will be displayed along with the actual testing
measured.
RIPPLE DETECTED NORMAL
Diodes function well in the alternator / stator.
EXCESS RIPPLE DETECTED
One or more diodes in the
alternator are not functioning
or there is stator damage.
Check to ensure the alternator
mounting is sturdy and that the belts are in good shape
and functioning properly. If the mounting and belts are
good, replace the alternator.
10.
Press <ENTER> key to continue the charging system
with accessory loads. One of the three results will be
displayed along with the actual testing measured.
TURN ON LOADS
AND PRESS ENTER
RUN ENGINE UP TO
2500 RPM 15 SEC.
RIPPLE DETECTED
××.××V HIGH
Or
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys RT003 Start-Stop at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys RT003 Start-Stop in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info