625814

Gys GYSPACK OBD Manual

5
Zoom out
Zoom in
Previous page
1/19
Next page
5
Thank you for choosing the Gyspack OBD – this is a high quality product and in order to get the maximum from it,
we advise you to read the instruction manual carefully prior to use. Please retain the manual for future reference.
General description
The GYSPACK OBD is designed to maintain the internal memory of your vehicle during a change of battery or any
other operation involving the disconnection of the battery. This unit prevents any loss of data or the need to
reprogram the on board system (Clock, radio, alarm, hands-free kit…) which can be a long process. Equipped with a
cigarette lighter plug, the GYSPACK OBD is also a 12V DC power supply for Laptops, TVs, tools, etc…
Easy to carry - this product has a compartment to store cables and charger.
To get the maximum from your machine and ensure the long life of the internal battery, it is recommended
the unit is charged after each use.
Test of the internal battery
To start the GYSPACK OBD and test the internal battery health, press the button for 3 seconds. The LEDs will light
and one of these three LED will stay on showing the battery status.
The red light indicates the internal battery is at less than 50% charge,
It is necessary to charge the internal battery immediately.
The yellow light indicates the internal battery is charged to between 50 and 75%
You can use the product but it is preferable to charge it as soon as possible.
The green light indicates the internal battery is fully charged.
The unit is ready to use.
To stop the unit press again the button for 3 seconds. If it doesn’t turn off manually, the unit stops after 4 hours.
Recharge of internal battery
To charge the internal battery, the GYSPACK OBD must not be connected to a vehicle.
1- Plug the charger of the unit into the mains supply (230V)
2- Plug the charger into the indicated place on the front of the machine
3- State of charge:
The red light indicates the internal battery is charging.
The green light indicates the internal battery is charged.
You can use the unit.
The yellow light indicates the internal battery is faulty.
It is necessary to replace the internal battery.
Attention:
• If after 24 hours of charge the red light is still on, the internal battery is damaged. It is necessary to replace it.
•
Do not try to charge the product via the cigarette lighter connection of your vehicle. The current is not stable
and can damage the product or the c
igarette lighter connection. For optimum charge you must use the
charger delivered with the unit and plug it into the mains supply.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys GYSPACK OBD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys GYSPACK OBD in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info