The arc welding can be dangerous and leads serious injury, may fatal. Protect yourself and protect the others.
Respect the following warnings:
Arc rays
Protect yourself thanks to a welding helmet in compliance with EN175 equipped with filters in compliance with EN 169 or
EN 379. Inform and protect by the same means any people in the welding environment.
Rain, steam,
humidity
The working environment must be clean (degree of pollution ≤ 3) and protected against rain. Put the appliance on an even
place and at least at one meter from the parts to be welded. Do not use in rain or snow.
Electric shocks
This appliance may only be use with a 230V monophase supply and must be earthed.
Moving
Do not underestimate the weight of the apparatus. Do not carry it over people or things. Do not drop it. Do not set it down
brutally
Burns
Wear protective or fire-proof clothing (overalls, jeans).
Use some welder gloves and a fire-proof apron.
Protect the others by installing non flammable protection wall , or prevent the others to not look at the arc and to keep a
sufficient distance
Fire risks
Suppress all flammable products from the working area. Do not works near flammable gas.
Smokes
Do not inhale gas or welding smokes. If indoors ventilate the area well and/or use local extraction ventilation equipment to
remove fumes and gases.
Extra precautions
Any welding operation :
- in environments with increased risk of electric shock,
- in confined spaces,
- in the presence of flammable or explosive materials must be evaluated in advance by an “Expert supervisor” and must
always be carried out in the presence of other people trained to intervene in case of emergency.
Technical protection measures MUST BE taken as described in the TECHNICAL SPECIFICATION "IEC 62081".
Welding in raised positions is forbidden unless safety platforms are used.
The persons carrying pacemaker have to consult a doctor before using these machines
Do not use the unit to thaw tubing.
In TIG welding, manipulate the gas bottle carefully. Indeed, there are risks if the bottle or the bottle valve are damaged.
R
ECOMMENDATION TO REDUCE ELECTRO
-
MAGNETIC EMISSIONS
General
The user is responsible for installing and using the arc welding equipment according to the manufacturer’s instructions. If electromagnetic disturbances
are detected, then it shall be the responsibility of the user of the arc welding equipment to resolve the situation with the technical assistance of the
manufacturer.
Evaluation of the welding area
Before installing arc welding equipment the user shall make an assessment of potential electromagnetic problems in the surrounding area
a.Other wiring, control cables, telephones and communication cables; above, below and adjacent to the welding machine
b.Radio and television transmitters and receivers;
c.Computer and other control equipment;
d.Equipment critical for safety purposes such as safety checks of industrial equipment;
e.The health of persons in the vicinity, for example persons who wear pacemakers and hearing aids;
f.Equipment used for calibration or measurements;
g.The protection of other equipment: The user must ensure that other equipment used in close proximity is compatible. This may require
additional protective measures;
h.The time of day when welding or other activities are carried out
i.The size of the area to be considered will depend on the structure of the building and any other processes in the area. The surrounding area
may extend beyond the boundaries of the buildings.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Gys Expert 220 DV at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Gys Expert 220 DV in the language / languages: English, German, French as an attachment in your email.
The manual is 2,25 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
