665742
82
Zoom out
Zoom in
Previous page
1/86
Next page
EASYMIG 130 / 140 / 150
82
A
Ampères - Amps - Ampere - Amperios - Ампер - Ampère - Amper
V
Volt - Volt - Volt - Voltios - Вольт - Volt - Volt
Hz
Hertz - Hertz - Hertz - Hertz - Герц - Hertz - Hertz
- Soudage MIG/MAG (MIG: Metal Inert Gas / MAG: Metal Active Gas)
- MIG/MAG Welding (MIG: Metal Inert Gas / MAG: Metal Active Gas)
- MIG/MAG Schweißen (MIG: Metal Inert Gas/ MAG: Metal Active Gas)
- Soldadura MIG/MAG (MIG: Metal Inert Gas / MAG: Metal Active Gas)
- Полуавтоматическая сварка MIG/MAG (MIG: Metal Inert Gas / MAG: Metal Active Gas)
- MIG/MAG lassen (MIG: Metal Inert Gas / MAG: Metal Active Gas)
- Saldatura MIG/MAG (MIG: Metal Inert Gas / MAG: Metal Active Gas)
- Soudage à l’électrode enrobée (MMA – Manual Metal Arc)
- Electrode welding (MMA – Manual Metal Arc)
- Schweißen mit umhüllter Elektrode (E-Handschweißen)
- Soldadura con electrodos revestidos (MMA - Manual Metal Arc)
- Ручная дуговая сварка (ММА)
- Booglassen met beklede elektrode (MMA – Manual Metal Arc)
- Saldatura all’elettrodo rivestito (MMA – Manual Metal Arc)
- Convient au soudage dans un environnement avec risque accru de choc électrique. La source de courant elle-même ne doit
toutefois pas être placée dans de tels locaux.
- Adapted for welding in environment with increased risks of electrical shock. However, the welding source must not be placed in
such places.
- Geeignet für Schweißarbeiten im Bereich mit erhöhten elektrischen Risiken. Trotzdem sollte die Schweißquelle nicht unbedingt
in solchen Bereichen betrieben werden.
- Adaptado a la soldadura en un entorno que comprende riesgos de choque eléctrico. La fuente de corriente ella misma no debe
estar situada dentro de tal locales.
- Адаптирован для сварки в среде с повышенным риском электрошока. Однако сам источник питания не должен быть
расположен в таких местах.
- Geschikt voor het lassen in een ruimte met verhoogd risico op elektrische schok. De voedingsbron zelf moet echter niet in der-
gelijke ruimte worden geplaatst.
- Conviene alla saldatura in un ambiente a grande rischio di scosse elettriche. L’origine della corrente non deve essere localizzata
in tale posto.
IP21
- Le matériel est de degré de protection IP21, signiant :
une protection contre l’accès aux parties dangereuses des corps solides de diam >12.5mm et une protection contre les chutes
verticales de gouttes d’eau.
- The material is IP21 degree of protection, meaning:
Protection against access to dangerous parts of solid bodies of diam> 12.5mm and protection against vertical drops of water drops.
- Das Material hat Schutzart IP21, das heißt:
Schutz gegen den Zugang zu gefährlichen Teile Festkörper mit einem Durchmesser von> 12,5 mm und Schutz gegen senkrecht
fallende Wassertropfen.
- El material tiene un grado de protección IP21, es decir:
la protección contra el acceso a partes peligrosas de cuerpos sólidos de diámetro> 12,5 mm y la protección contra la caída vertical
de gotas de agua.
- Материал имеет степень защиты IP21, а это означает:
защита от доступа к опасным частям твердых тел диаметром> 12,5 мм и защита от вертикально падающих капель воды.
- Het materiaal heeft beschermingsgraad IP21, betekenis:
bescherming tegen toegang tot gevaarlijke delen van vaste stoffen met een diameter van> 12,5 mm en bescherming tegen verticaal
vallende waterdruppels.
- Il materiale ha grado di protezione IP21, signicato:
la protezione contro l’accesso a parti pericolose di corpi solidi di diametro> 12,5 millimetri e la protezione contro la caduta verticale
di gocce d’acqua.
- Courant de soudage continu.
- Welding direct current.
- Gleichschweißstrom.
- La corriente de soldadura es continua.
- Сварка на постоянном токе.
- DC lasstroom.
- Corrente di saldatura continuo.
- Alimentation électrique monophasée 50 ou 60Hz.
- Single phase power supply 50 or 60Hz.
- Einphasige Netzversorgung mit 50 oder 60Hz.
- Alimentación eléctrica monofásica 50 o 60 Hz.
- Однофазное напряжение 50 или 60Гц.
- Enkel fase elektrische voeding 50Hz of 60Hz.
- Alimentazione elettrica monofase 50 ou 60Hz.
ICÔNES / SYMBOLS / ZEICHENERKLÄRUNG / SÍMBOLOS / СИМВОЛЫ / PICTOGRAMMEN / ICONA
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys EASYMIG 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys EASYMIG 150 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info