482816

Gymform Vibro Max Manual

7
Zoom out
Zoom in
Previous page
1/7
Next page
Operating Instructions
Programs of the Gymform® Vibro Max.
There are 5 specically designed programs. Consult the following list to choose the program that best ts
your needs.
88 – Manuel Mode – choose between intensity levels of 1 to 50, depending on the speed you want. Consult
the attached graph for the relation between speed and oscillations per minute.
P1 – Strength and Power Conditioning Program.
Slowly increases your body’s heart rate and vibration resistance.
P2 – Fat Burning Program.
Keeps your heart rate in the fat burning zone.
P3 – Advanced Aerobic and Anaerobic Training Program. (Fartlek Training)
Fartlek training - concentrated on both speed and endurance training. For advanced athletes.
1 – Body Mass Index Program (BMI). This mode reads your BMI, so you can calculate your body’s fat rate
and see it reduce.
All programs last for the recommended 10 minutes.
Operating the Machine
Maximum use of the Gymform® Vibro Max is 4 x 10 minute sessions per day. Please do not exceed this.
Turn the unit on by pressing the red on/stop button in the back of the main unit Nº1.
Press the P Program select button to nd your desired program ie – P1, P2, P3, 88, 1.
When you have selected your desired program Press the purple start button to begin your workout.
If you would like to workout for a shorter time than 10 minutes please follow these instructions.
When a program is ashing in the program selection LCD you can press the blue conrm button to change
the time. The time LCD screen will ash, by pressing either of the red and green up and down keys you can
alter the time of your workout. Press the purple start button to begin your workout.
For BMI –
What is Body Max (BMI) Index?
Body Mass Index is a formula for measuring a person’s level of overweight or obesity using measurements
of height and weight.
BMI Chart -
BMI CONDITION
<20 underweight (may need to gain weight)
20-25 advisable range
25-30 overweight (some weight loss may be benecial to health)
30-35 obese (need to lose weight)
>40 severely obese (urgent need to lose weight; advised to consult doctor)
To calculate your BMI:
Please select program 1.
You must enter 4 different types of information for the Vibro 10 000 to read your Body Max Index (BMI)
The red and green keys (up and down) change the value. Once you have the correct value please press the
blue c button to conrm. Then you can move on to selecting your next value.
1st value is – Gender Male is 1 Female is 2.
2nd Value is – Age,
3rd Value is – Height. Height is in cm. (FYI there are 30.48 cm in a foot)
4th Value is – Weight. Weight is in kg.
When the screen displays “---“ place your hands on the silver bits on the bars.
The Gymform® Vibro Max will now display your bodies BMI.
Pls take your BMI every week to see your progress!
The Gymform® Vibro Max is constructed according to the following regulations -
EMC Directive for EU: LVD for EU:
CENELEC EN61000-3-2 CENELEC EN 60335-1
CENELEC EN61000-3-3 BSI BSEN 50366
CENELEC EN 55014-1 Product Specication -
CENELEC EN 55014-2 200W
AC 220 – 240 V
50Hz
Instructions for the Pedometer with Radio
Features:
This pedometer counts every step you take in a well designed LCD screen. This exclusive pedometer also
contains an FM radio.
Inserting the battery
Open the battery cover and place 1PCS AAA battery, insert with the polarity (+)facing up and(-)facing down
,then close the battery cover .
Operation of the Pedometer
Attach the pedometer to your waist band or belt and this will count the amount of steps that you take. If you
would like to restart the pedometer to 00000 please press the large reset button “R” on top of the pedometer.
Note - At the same time you may listen to the radio.
Operation of the Radio:
Plug the headphones into the headphone jack located at left-side of the pedometer and indicated with the
symbol
Turn on the receiver by moving the grey level on the left of the pedometer to either low or high. This is the
Volume.
Press the smaller button “R” (Reset) once to ensure the frequency is at The low-end position.( FM88MHZ).
The smaller reset button “R” is at the right side of the pedometer below the scan button “S”.
Press “Scan” once, it will automatically search for broadcast stations.
Press “Scan” to select your desired station. You will notice when the radio reaches the highest radio station
(FM108MHZ) because the scan will stop searching for stations. Please press the smaller reset button “R” to
bring the radio back to the low-end position(FM88MHZ). Then you can select your desired broadcast station
again by pressing scan “S”.
To turn off the radio, switch the grey button on the right side of the pedometer to “OFF”.
Note -
This device uses 1ps AAA battery(not included),please change the battery when the LCD screen is blank or
it is not possible to hear the radio.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gymform Vibro Max at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gymform Vibro Max in the language / languages: English as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gymform Vibro Max

Gymform Vibro Max User Manual - English, German, Dutch - 30 pages

Gymform Vibro Max User Manual - Dutch - 6 pages

Gymform Vibro Max User Manual - French, Italian, Portuguese, Spanish - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info