519137
17
Zoom out
Zoom in
Previous page
1/20
Next page
D
17
22. Reparaturen/Motorstörungen
Reparaturen die spezielle Fachkenntnisse erfordern, sollten nur von autorisierten Service Centern
durchgeführt werden. Unsachgemäßer Eingriff kann das Gerät beschädigen oder Ihre Sicherheit gefähr-
den.
Motorstörungen
Störung Ursache Behebung
Der Motor startet nicht 1. Tank leer
2. Motor abgesoffen
3. Zündkerze verschmutzt,
(Kohlerückstande auf den
Elektroden) Elektrodenab-
stand zu groß
4. Vergaser, -düsen ver-
schmutzt
5. Kerzenanschluss, Zündkabel
schadhaft
6. Kein Zündfunke
1. Volltanken
2. Gas wegnehmen, mehrere
Male starten, wenn nötig,
Zündkerze ausbauen, reini-
gen und trocknen
3. Kerze reinigen, Wärmewert
der Kerze kontrollieren evtl.
Zündkerze erneuern0.6-0.7
mm einstellen
4. Vergaser reinigen, ausbla-
sen
5. Erneuern
6. Kurzschlußknopf, Kabel
kontrollieren, Zündmodul
prüfen, evtl. austauschen
Spaltmaß (0,3-0,4 mm) ein-
stellen.
Der Motor läuft im Leerlauf zu
schnell
1. Motor kalt 1. Langsam warmfahren evtl.
Choke etwas schließen.
Der Motor gibt keine Höchstlei-
tung
1. Zündkerze verschmutzt,
(Kohlerückstande auf den
Elektroden) Elektrodenab-
stand zu groß
2. Vergaser, -düsen ver-
schmutzt
3. Luftfilter verschmutzt
4. Auspuff, Zylinderauslasska-
nal
5. Dichtring im Kurbelgehäuse
undicht
6. Zylinder, Kolben/-ringe
abgenutzt
7. Falsches Kraftstoffgemisch
(zuviel Öl)
8. Falsche Zündung
1. Kerze reinigen, Wärmewert
der Kerze kontrollieren evtl.
Zündkerze erneuern
0.6-0.7 mm einstellen
2. Vergaser reinigen, ausbla-
sen
3. Reinigen
4. Auspuff abbauen und reini-
gen Kohlerückstande entfer-
nen.
5. Erneuern
6. Zylinder, Kolben oder -ringe
erneuern, Zylinder auf Ü-
bermaß aufschleifen und
Kolbenübergröße montieren.
7. Gemäß Anleitung tanken
8. Spaltmaß des Zündmoduls
(0,3-0,4 mm) einstellen
Der Motor kommt nicht zum
Stillstand
1. Kerze hellgrau mit Anzei-
chen zum Glühen (
Schmelzperlen)
2. Kohlerückstände im
Verbrennungsraum
1. Kerze mit höherem Wärme-
wert einbauen. mmmmm
2. Zylinderkopf, Kolbenboden
und Zylinderkanäle reinigen.
23. Ersatzteile
Reklamationen und Ersatzteilbestellungen werden schnell und unbürokratisch mit einem
entsprechenden Service-Formular unter
http://www.guede.com/support abgewickelt.
Dieses Formular kann auch unter
Tel.: +49 (0) 79 04 / 700-0 Fax: +49 (0) 79 04 / 700-250 E-Mail: info@guede.com
angefordert werden.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude KS 400B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude KS 400B in the language / languages: German as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info