623132

Gude GTB 20 55194 Manual

23
Zoom out
Zoom in
Previous page
1/213
Next page
Column Base Plate Assembling (Fig. 3)
1. Align the column to the holes in the base plate.
2. Insert screw 10mm x 25mm in each hole of the column.
Mounting Bench on Column (Fig. 3)
1. Slacken the setting screw (4) to remove the ring (3).
2. Remove the rack from the column (5).
3. Check the worm gear (8)to see whether it is properly inserted in the bench fastening arm (7) and it
touched the gear wheels. The stem (9) should protrude ca 2.5 cm from the box (Fig. 4).
4. Insert the rack (5) in the cross groove (6) of the bench-fastening arm (7) (Fig. 4).
The bench fastening arm should be seated in the rack middle section.
5. Carefully slide the bench fastening arms and the rack (1) on the column (2) (Fig. 5). Insert the rack lower
part in the slot of (3) the column base plate.
6. Hold the fastening arm and the rack against the column (Fig. 6) and slide the rack ring (4) on the column.
7. The rack (1) will just fit in the ring (4). Make sure that there is sufficient clearance between the rack and
the ring so that the bench may rotate around the column. .
8. Tighten the set screw (5). to fix the ring position.
9. Fit the handgrip (1) in place and tighten the setscrew (2). (Fig. 7)
10. Slide the column-locking lever (1) in the bench-fastening arm (2) (Fig. 8)
11. Rotate the bench and adjust it so that it is above the base plate and it stays in alignment with it
Fig. 5 Fig. 6
Fig. 3 Fig. 4
23
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GTB 20 55194 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GTB 20 55194 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info