623132

Gude GTB 20 55194 Manual

19
Zoom out
Zoom in
Previous page
1/213
Next page
4. Drills-Specific Safety Precautions
WARNING: DO NOT OPERATE THE MACHINE BEFORE IT IS COMPLETELY ASSEMBLED AND
INSTALLED IN COMPLIANCE WITH INSTRUCTIONS.
1. NEVER SWITCH THE DRILL ON BEFORE YOU REMOVE ANY OBJECTS FROM THE BENCH (tools, wastes
etc.).
2. NEVER put your hands and finger close to the drill bit.
3. DO NOT ATTEMPT to drill material with the surface other than flat unless a suitable support is available.
4. NEVER switch the machine on while pressing the drill bit against the material.
5. Before switching the machine on, MAKE SURE that the bench-clamping lever is firmly tightened.
6. NEVER draw anything on the piece to be drilled, do not mount, do not clamp the material on the bench while the
machine is running.
7. MAKE SURE that the bit is firmly clamped in the chuck.
8. Before switching the machine on, MAKE SURE that the chuck key is removed.
9. ADJUST the bench or the down stop to avoid drilling in the bench.
10. ALWAYS stop the bit before removing chips from the bench.
11. USE A CLIP OR CLAMPING JAWS to secure the piece to be drilled on the bench.
12. DON´T wear gloves when operating the drill.
13. Before leaving the machine, PUT THE CURRENT SUPPLY OFF, remove the bit and clean the bench.
14. Set the drill to speed answering a specific job. .
15. If a part of the drill is missing, found damaged or id an electrical component does not work properly, switch the
current supply off and pull the cable out of the socket. Replace the missing, damaged or not working
components and only then resume the machine operation.
Follow the above safety regulations!!
19
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GTB 20 55194 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GTB 20 55194 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info