Manual Gude 420-10-100 50071 (page 29 of 172) (English, German, Dutch, French, Italian)

621178

Zoom out

Zoom in

1/172

consumption and the compressor eective amount

delivered must necessarily be considered.

(Pneumatic tools and accessory equipment can be

found at www.guede.com)

Operation at lower temperatures

At lower temperatures, below 5°C, problems may

be experienced when starting. They are manifested

by growling of the electric motor. In such a case, the

appliance must be immediately switched o and oil

(5W30) changed in warmer conditions.

Requirements for operating sta

The operating sta must carefully read the Opera-

tingInstructions before using the appliance.

Qualication: Apart from the detailed instructions

by aprofessional, no special qualication is necessa

ry forappliance using.

Minimum age: Persons over 16 years of age can

only workon the appliance.An exception includes

youngsters trained in order to reachknowledge

under supervision of the trainer duringoccupational

education.

Training: Using the appliance only requires corre-

spondingtraining by a professional or the Operating

Instructions. Nospecial training is necessary.

Emergency Action

Apply the rst aid adequate to the injury and

get qualied medical assistance as quickly as

possible. Protect the injured person from more

accidents and calm him/her down.

For the sake of eventual accident, in ac-

cordance with DIN 13164, a workplace has

to be tted with a rst-aid kit. It is essential

to replace any used material in the rst-aid

kit immediately after it has been used. If

you seek help, state the following pieces of

information:

1. Accident site

2. Accident type

3. Number of injured persons

4. Injury type(s)

When using compressed air, you must know and

comply with the safety precautions to be adopted

for each type of application (ination, airpowered

tools, painting, washing with water-based deter-

gents only, clinching, etc.).

When using compressed air, you must know and

comply with the safety precautions to be adopted

for each type of application (ination, airpowered

tools, painting, washing with water-based deter

gents only, clinching, etc.).

Caution! Never switch the compressor on or o using

the plug. Pressure switch to be pressed at all times.

Do not leave the compressor on over night as it could

become a source of danger.

At the end of your working day, switch the appliance

o, release the air jet and unplug the compressor.

Warning: if the water that condenses is not drained,

it may corrode the receiver, reducing its capacity and

impairing safety.

Never leave the appliance exposed to adverse wea

ther conditions (rain, sun, fog, snow).

If this compressor is used outdoors, always remem

ber to stow it after use in a covered or closed place.

Never use the compressor outdoors in rain or bad

weather.

Do not place ammable or nylon/fabric objects close

to and/or on the compressor.

Do not cover the air inlets on the compressor.

The compressor must not be tted in a vehicle for

industrial purposes without an inspection by an

expert!

If the compressor is used for industrial purposes, it

must be checked by an expert before putting into

operation for the rst time. Such check must be orde

red by the operator (under BetrSichV Section 17 No.

25 – operation safety regulation)

Caution! When tted in automatic equipment, it is

necessary to install appropriate alarm or warning

devices in case of power outage or malfunction or

compressor (e.g. feed line, etc.) failure.

Requirements for operating sta

To guarantee perfect and reliable operation of

the rotary and percussive pneumatic tools such as

impact wrenches, staplers or nailers, etc., the com-

pressed air must be supplied ltered - with oil via the

lubricator or maintenance unit

A ltered water separator should be used for var

nishing in any case.

To select a suitable pneumatic tool, the tool air

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude 420-10-100 50071 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude 420-10-100 50071 Manual

Product: