622199
15
Zoom out
Zoom in
Previous page
1/64
Next page
Never use hydrogen,
oxygen, carbon dioxide or
any other gas in bottles as
a source of energy for this
appliance as that could
cause an explosion and
subsequently serious
injuries.
When in the working
order, wear the appliance
by its handle only and
never with the pressed
trigger. Make sure you are
not perforating thin
material when working
and the appliance is not
slipping on corners and
edges.
Never connect the
appliance with a
pneumatic hose the
pressure of which
exceeds 150 psi or 10.0
bar.
The hose must be
dimensioned for pressure
of min. 10.3 bar or 150
psi, however, at least for
150 % of the maximum
pressure in the system.
The appliance and the
feed hose must be fitted
with a hose coupling so
that the pressure fully
leaks when the connecting
hose is disconnected.
The magazine can only be
filled when the appliance
is connected to the air
inlet.
The appliance must never
be used if the fuse, trigger
or springs are missing or if
they cannot be used or
are damaged. The fuse,
trigger and springs must
never be removed.
Check whether the trigger,
screws and nuts are fully
tightened before using the
appliance.
The appliance must not be
changed in any way
without prior approval.
The appliance must
always be disconnected
from the air inlet after
being used and if you are
not using it any more.
Never aim the pointed
side of the appliance at
yourself or other persons.
Hold the appliance in a
way the head and body
could not get damaged if
there is back impact.
Never start the appliance
when pointing to an open
space.
The switch fuse can only
be fixed to the working
area, however, never on
materials that are too hard
to enable clamps or nails
to get through.
Never use the appliance
to nail in an inclined
position. Never start the
appliance at a place
where a clamp or nail has
already been fired!
Do not shift the fuse to the
working surface when you
are planning to fire.
Do not fire too near the
edge of the working
surface.
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude 40205 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude 40205 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info