623595
12
Zoom out
Zoom in
Previous page
1/124
Next page
8
TIP
2-3 mm
D Kettenspannung einer neuen Kette nach
ca. fünf Sägevorgängen erneut einstellen.
Danach bei abgeschaltetem Motor alle 50
Sägevorgänge Kettenspannung prüfen und
einstellen.
GB Repeat tensioning of new chain after
approx. 5 cuts. With the engine o , check and
adjust the chain tension after every 50 cuttings.
F Réglez à nouveau la tension de la nouvelle
chaîne après environ cinq coupes. Ensuite, le
moteur arrêté, contrôlez et réglez la tension de
la chaîne toutes les 50 coupes.
I Controllare la tensione della nuova catena
dopo averla utilizzato per cinque volte circa.
A motore spento veri care e regolare ogni 50
tagli la tensione della catena.
NL Kettingspanning van een nieuwe ketting na ca.
vijf zaagsneden opnieuw instellen.
Vervolgens telkens bij uitgeschakelde motor,
om de 50 zaagprocessen, de kettingspanning
controleren en nastellen.
CZ Napnutí nového řetězu po cca pěti řezáních
opět seřiďte. Poté při vypnutém motoru
zkontrolujte a nastavte po každých 50 řezáních
napnutí řetězu.
SK Napnutie novej reťaze po cca piatich rezaniach
opäť nastavte. Potom pri vypnutom motore
skontrolujte a nastavte po každých 50 rezaniach
napnutie reťaze.
H Az új lánc feszültségét kb. 5 vágás után
újra állítsa be. Azután kikapcsolt motorn8l
ellenőrizze és állitsa be minden 50.-ig vágás
után a lánc feszültségét.
SLO Po peti uporabi verigo ponovno napnite
oz. nastavite. Nato z ugasnjenim motorjem
preverite in nastavite vsakih 50 minut napetost
verige.
HR Poslije pet ciklusa rezanja ponovno podesite
napetost novog lanca. Zatim kod isključenog
motora provjerite napetost lanca i podesite je
nakon svakih 50 rezanja.
BG     .  
  .  
     
  50   
.
RO După circa cinci tăieri, reglaţi din nou
întinderea lanţului nou. După care, cu motorul
oprit, controlai și reglai după  ecare 50 de
tăieri, întinderea lanului.
BIH
Posle pet ciklusa rezanja ponovo podesite
zategnutost novog lanca.
Posle toga prilikom
isključenog motora proverite napetost lanca i
podesite je posle svakih 50 sečenja.
3
D
Kettenspannung kontrollieren.
GB
Check the chain tension
F
Contrôlez la tension de la chaîne
I
Controllare la tensione della catena
NL
Kettingspanning controleren.
CZ
Zkontrolujte napnutí řetězu.
SK
Skontrolujte napnutie reťaze.
H
Ellenőrizze a lánc feszültségét
SLO
Preverite, če je veriga napeta.
HR
Provjerite napetost lanca.
BG
   
RO
Controlaţi întinderea lanţului.
BIH
Proverite zategnutost lanca.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude 36 KS 95660 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude 36 KS 95660 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info