34470
4
Zoom out
Zoom in
Previous page
1/60
Next page
Allgemeiner Teil / General Section TVR 37…, TVR 51…, TVR 55…
1 - 4 GRUNDIG Service
Entwicklungscode / Produktionscode
Technische Weiterentwicklungen oder Änderungen sind wie folgt auf
dem Typenschild ersichtlich:
Produktionscode – geringfügige Änderungen
Entwicklungscode – gravierende Änderungen
Evolution Code / Production Code
Technical advance developments or changes are to be seen from the
type plate as follows:
Production code – minor changes
Evolution code – important changes
Entwicklungscode / Evolution code
Gerätetyp / Type of product
Fernbedienung / Remote Control
Seriennummer / Serial number
Geräte-Optionscode / Option Code
Bestellnummer / Order number
Produktionsdatum / Production date
Produktionscode / Production code
Änderungen Abgleich
zu Punkt 1. Leistungs-Chassis (GSPD)
Abgleichvorgang
Spannung mit R3358 (Ubat) entsprechend dem Gerät ein-
stellen. TVR37… 101,5V
TVR51… 120,3V
TVR55… 84,0V
zu Punkt 2. Bildrohrplatte
Vorbereitung
Folgende Einstellungen im betriebswarmen Gerätezustand
(ca. 15 Minuten nach dem Einschalten) durchführen:
Kontrast "84% = OSD-Skala-Maximum minus 4 Teilstriche"
Helligkeit "50%"
Schirmgitterregler (SCREEN) "Linksanschlag"
R3919 und R3921 "Mittelstellung"
Schwarztestbild an der AV-Buchse einspeisen
Entsprechend dem Gerät jeweils folgende Werte mit den
Cutoff-Reglern R3920, R3918 und R3917 an den R-, G-
und B-Eingängen der Bildröhre einstellen:
TVR 37…: 115V
TVR 51… / TVR 55…: 140V
Alteration Adjustment Procedures
to point 1. Power Chassis (GSPD)
Alignment Procedure
With R3358 (Ubat) set the following voltage according to the
different models. TVR37… 101,5V
TVR51… 120,3V
TVR55… 84,0V
to point 2. Tube PCB
Preparation
Allow the set to warm up (for approx. 15 minutes after
switching on) and carry out the following adjustments:
Contrast "84% = maximum minus 4 divisions on OSD scale"
Brightness "50%"
– Screen grid adjustment control (SCREEN) "left stop"
– R3919, R3921 "center position"
Feed a black test pattern into the AV socket
With the cutoff controls R3920, R3918 and R3917, set the
following levels at the R, G, and B inputs of the picture
tube dependent on the TVR model:
TVR 37…: 115V
TVR 51… / TVR 55…: 140V
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig TVR 3710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig TVR 3710 in the language / languages: German as an attachment in your email.

The manual is 5,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info