ķ
18
Multi-Satellite Reception/Technical Data
The DiSEqC protocol comprises the following pos-
sibilities:
– Polarization H or V.
– Selection between lower and upper frequency
range (– or
~
).
The symbol “–“ means the reception of the lower
frequency range of a satellite. The symbol “
~“
means the reception of the upper frequency
range.
– Selection between up to 4 satellites (A/B/C/D).
You can therefore receive the lower and upper fre-
quency range of up to 4 satellites (– or
~ swit-
ches between the frequency ranges, A/B/C/D bet-
ween the satellites).
The oscillator frequencies of the LNC’s can be en-
tered in the „LNC settings“ menu (see page 14).
These switching options are independent of each
other for each of the two tuners A and B connec-
tions.
If the aerial system is accordingly equipped, it is
therefore possible to receive with each tuner
connection the lower and upper frequency range of
up to 4 satellites.
To receive with DiSEqC on one tuner connection the
signals of two satellites, select the LNC arrange-
ment 4 in the “LNC SETUP“ menu (5 or 6, if neces-
sary).
Enter the oscillator frequencies of the LNC’s.
For the programme positions of the corresponding
satellite, you must select that LNC which delivers
the signals which are handled by the multiswitch.
3
2
ʐ
A
$
4
$
%
✓
–A 09.750 –C 09.750
~A 09.750 ~C 09.750
–B 09.750 –D 09.750
~B 09.750 ~D 09.750
Ǻ / OK
1
Ǻ
Technical Data
Programme positions: 300
Timer: 4 Events, 28 day Timer
Connections:
TV set (TV): 1 x 21 Pin, EURO AV
Decoder (DEC): 1 x 21 Pin, EURO AV
Video recorder (VCR): 1 x 21 Pin, EURO AV
Audio L/R: 2 x RCA, CINCH
LNC input:A 1 x F-socket
LNC input:B 1 x F-socket
LNC switch-over: + 13 V/+ 18 V, max. 350 mA
0/22 kHz Signal
Tone Burst signal (Mini-DiSEqC)
DiSEqC 1.0 signal
HF input: 1 x coax, IEC 169/2, socket
HF output: 1 x coax, IEC 169/2, plug
HF:
Input frequency range: 950 to 2150 MHz
Input impedance: 75 Ohm, nominal
IF bandwidth: 18/27 MHz (-3 dB/c)
FM limit value
(static): ≤ 6 dB
HF output: Channel 28 – 47, adjustable,
channel 37 preset.
Video:
Output: 1 Volt (peak-peak), clamped, fil-
tered, equalized, sync output.
Output impedance: 75 Ohm, nominal, direct connec-
tion.
Audio:
Subcarrier frequencies: Fully tunable 5.0 - 9.0MHz
Frequency response: 40 Hz-18 kHz +/-2 dB
Audio deemphasis: Panda, 50 µs, J17
THD (at 1 kHz): ≤ 0.2% with 30 kHz deviation.
General:
Power consumption: 30 W max.
≤ 8W in stand-by
Power supply: 110 – 265 V a.c.,
50/60 Hz
Dimensions: Width: 400 mm; Height: 70 mm;
Depth: 235 mm
Weight: 2 kg
The unit conforms with the protection requirements
of the 73/23/EWG and 89/336/EWG guidlines of the
European Council. The standards EN 55013/A12,
EN 55020 and EN 60065 required fo the CE certifi-
cation are maintained.
Subject to alteration!