569638
5
Zoom out
Zoom in
Previous page
1/10
Next page
Connecting the unit
The unit is designed to operate from a mains
supply of 230 V, 50/60 Hz
i
.
When the set is connected for the first time or after
a power failure (without standby batteries fitted), the
display flashes to indicate that the clock and, if
necessary, the alarm time(s) should be set.
Standby-batteries – mains failure
If the standby batteries are fitted, the clock will
continue to operate during mains failure and the
preset stations are kept in the memory.
However, the display will not be illuminated and the
alarm will not sound unless the mains supply is restored
within 90 minutes of the preset alarm time (if so, the
radio will switch on or the alarm tone will sound).
Insert two 1.5 V alkaline batteries (IEC R03, size
AAA, UM-4 or equivalent) into the battery
compartment on the base of the set.
Insert the batteries only after the unit has been
connected to the mains in order to prevent unneces
-
sary drain. We recommend that the batteries are
replaced approximately once a year.
If the clock radio is to be disconnected for a long
period, the standby batteries should be removed,
otherwise they may discharge too quickly and
may leak.
Note:
The unit remains connected to the mains even
when it is switched off. The unit is only fully
isolated from the mains if the mains plug is
removed from the wall socket.
Note on Environmental Protection
Do not throw exhausted batteries in the
household refuse.
Hand over the old batteries to your
dealer or public collecting points when
buying new ones.
Important note for users in the U.K.:
When fitting a mains plug, follow the
instructions on page 2.
RDS / RESET POWER SUPPLY
11
SC 610 page 11
GB
RDS Features
v
The Radio Data System (RDS) is an information
system transmitted in addition to the VHF (FM) radio
programme
Your Sonoclock 610 offers the following features:
Station Name
The station name or an abbreviation is shown in
the display instead of the tuned frequency
(Example: BAYERN 3).
Traffic Information
Indicates which RDS stations provide traffic
information.
EON (Enhanced Other Network)
If your broadcasting station is using EON, you will
also hear traffic flashes of other programmes, when
the Traffic Information function is enabled.
Clock Auto Adjustment
Automatic time setting and synchronizing the clock
(if enabled).
Reset button
If, due to external interferences (caused by static
charges of carpets, thunderstorms, etc.), the
control electronics of your Sonoclock 610 should
receive bad information signals, or if no entries
at all are possible, press the RESET button.
For pushing this button, it is best to use a bent-up
paper clip.
This resets the unit to its initial state. The stored
data for the individual station memory positions,
the clock settings and the Last Station Memory
are cleared.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig Sonoclock 610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig Sonoclock 610 in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig Sonoclock 610

Grundig Sonoclock 610 User Manual - German - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info