ENGLISH
27
Cleaning the tape drive
To guarantee good recording and playback quality, clean the parts shown
(1, 2, 3) after every 50 hours of use, or once a month.
Open the tape compartment, moisten a cotton swab with alcohol or a special
head-cleaning fluid and clean the idler (3), the capstan (2) and the magnetic
heads (1). Close the cassette compartment. You can also play a cleaning cassette
to clean the magnetic heads (1).
Protect your cassettes from humidity, dust, heat and cold.
Do not store your tapes near devices with strong magnetic fields such as
televisions and loudspeakers.
After using a cassette, put it back in its protective case.
Technical data
This device is noise-suppressed according to the applicable EU directives.
This product fulfils the European directives 89/336/EEC, 73/23/EEC and 93/68/EEC.
This device conforms to the safety regulation DIN EN 60065 (VDE 0860) and therefore the
international safety regulation IEC 60065.
Never open the device casing. The manufacturer will not accept any liability for damage
resulting from improper handling.
The type plate is located on the bottom of the device.
INFORMATION
_______________________________________________
1213
Power supply
Mains operation: 230 Volt, 50/60 Hz
Battery operation: 6 x 1.5 V IEC
(R20/UM1/D-Size)
Max. power consumption
Operation: 16 W
Standby: < 2 W
Output
DIN 45324, 10 % THD
Music signal power: 2 x 2 W
Sine wave power: 2 x 1.5 W
Stereo headphone jack: 3.5 mm ø
Radio unit
Frequency bands
FM 87.5 ...108.0 MHz
MW 522 ... 1620 kHz
CD unit
Frequency response: 20 Hz ... 20 kHz
Noise voltage ratio: ≥ 65 dB
MP3 features
Playback format: MPEG 1 layer 3 (MP3)
Sampling frequency: 44.1 kHz
File system / file management: ISO 9660 Level 1
compatible
Tape unit
Sound recording medium: Compact cassette
according to DIN 45516
Track position: International quarter-track
Tape speed: 4.76 cm/sec.
Motor: DC motor
Frequency range: 125 Hz ... 10 kHz
Noise voltage ratio: ≥ 42 dB
Band speed fluctuation: ≤ 0.35 %
Dimensions and weight
W x H x L: 420 x 280 x 166 mm
Weight: 3.2 kg
Technical and design modifications reserved.