Manual Grundig RC-7-1 (page 2 of 12) (English)

490350

Zoom out

Zoom in

1/12

1. IR Transmitter

2. POWER Key

3. Device Keys

4. Number Keys

5. TV/AV Key

6. Video Recorder Keys

7. LED indicator

8. SET-UP Key

9. Mute Key

10. Fastext Keys

Thank you for purchasing the RC-7-1 universal remote con-

trol.Before you can use your new remote, you will need to pro-

gram it to operate the specic A/V home entertainment equip-

ment you wish to control. Simply enter proper device codes for

your equipment and it is ready to use.

• BATTERY INSTALLATION / CHANGE

1. On the back of the RC-7-1,

pull the battery compartment cover.

2. Insert two (2) AAA new Alkaline

batteries.

3. Match the (+) and (-) poles correctly

aligned into the battery compartment.

4. Close the battery compartment.

NOTE: Removing the batteries for

more than 2 minutes will require you to reprogram your re-

mote.

• SETTING UP BY DIRECT ENTRY

To program your RC-7-1 to operate your TV:

1. Turn on your TV.

2. Press & hold the key and press the key once. At this

time, the red LED light will light up.

3. Release the key and key.

4. Enter the 4-Digit TV code from the code list for your brand

equipment. If you perform this procedure correctly, the red

LED light will go out. Otherwise, the red LED ashes 2

times.

5. Aim the RC-7-1 at your TV and press key. Your TV should

turn off. If none of the keys or only some of the keys operate

your TV, repeat Steps 2-4, trying each code listed for your

brand until you nd the one that operates your TV.

6. Your RC-7-1 is now programmed to operate your TV. Write

down your TV code on the label at the back of the RC-7-1

for future reference.

7. To program other equipment, repeat the Steps 1-6 for your

DVD, SAT, AUDIO and or your second TV or DVD.

NOTE: To leave the SETUP during the code entering, just

press any of the [DEVICE] keys once. In other cases, if no

code is entered within 10 seconds, the red LED light will go

out automatically.

• SETTING UP BY AUTO SEARCH

This auto search method checks all its preprogrammed codes

to nd the code that will operate your equipment automatically.

This method may take a few minutes.

1. Turn on your TV and press the device mode as .

2. Aim the RC-7-1 at your TV.

3. Press & hold the key and key at the same time for 3

seconds until the red LED lights up. Then release the key

and key. AUTO SEARCH is now performed.

31588_manual.indd 2 22-09-2008 13:51:53

Hallo,
I can’t find the up down button on my grundig universal rc Submitted on 25-3-2021 at 13:28
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grundig RC-7-1 in the language / languages: English as an attachment in your email.

The manual is 4,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grundig RC-7-1 Manual

Product: