14
CONNECTION AND PREPARATION__
Connecting with a cinch cable (progressive scan)
Caution:
This connection transmits video signals at a high frequency
range. Before you first switch on the device, please check
whether your television, flat screen or projector is suitable for
this use.
GRUNDIG accepts no liability for damage resulting from
negligent usage.
Notes:
If you connect the DVD/VCR recorder using the »Pr«, »Pb«
and »Y« sockets, you can switch to progressive scan using the
»P.SCAN« button. You must first set the EURO-AV output to
“YUV”, as described on page 21.
Depending on the model of television, flat screen or projector,
you have to activate the relevant input sockets on the device.
1 Plug a standard cinch cable into the »Pr«, »Pb« and »Y«
sockets of the DVD/VCR recorder and in the corresponding
sockets (e.g. VIDEO IN or COMPONENT Y P
B
/C
B
P
R
/C
R
) of the
television, flat screen of projector.
2 Plug standard cinch cables into the »AUDIO OUT R L« sockets
on the DVD/VCD recorder and the corresponding sockets
(AUDIO IN) on the television, flat screen or projector.