673700
46
Zoom out
Zoom in
Previous page
1/47
Next page
46
INFORMATION_____________________________________
Troubleshooting
If a fault occurs, first refer to this information before you take the digital
recorder for repair.
If you are unable to rectify the fault using the information given here, contact
your local dealer or service specialist.
Under no circumstances should you attempt to repair the digital recorder
yourself, as this will invalidate the guarantee.
PROBLEM
No function, mode
indicator not lit
Message: »Short
circuit or overload at
the antenna input«
No picture
No sound
Message »Faulty
signal«
The remote control
does not work
The time is not dis-
played correctly
Interference of picture
from stations with a
frequency of approx.
12480 MHz
POSSIBLE CAUSE
Power cord incorrectly
connected
Short circuit on the line
SCART cable not properly con-
nected, incorrect settings in the
»Video output« menu
The sound is muted, the SCART
cable is incorrectly connected
or the receiver volume is set to
low
The satellite antenna is not cor-
rectly installed, the satellite
cable is damaged, incorrect set-
tings in the »Antenna connec-
tion« menu
No batteries are inserted, or
they are low, or the remote con-
trol is not directed at the
infrared sensor
Incorrect remote control level
Deviation from local time
The interference may be caused
by DECT cordless telephones
near the receiver
REMEDY
Connect the power cord
correctly
Check the plug, cable and
LNB
Connect the SCART cable
correctly, correct the menu
settings
Switch on the sound,
connect the SCART cable
correctly, turn up the
volume
Install the satellite antenna
correctly, replace the satel-
lite cable, enter the correct
menu settings
Insert batteries correctly,
insert new batteries, align
remote control with the
infrared sensor
Press »DR« (see also
page 42)
Correct the deviation
(see page 17)
Take the DECT telephones
away from the receiver and
the satellite cable
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig DSR 4530 HDD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig DSR 4530 HDD in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig DSR 4530 HDD

Grundig DSR 4530 HDD User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info