166169
9
Zoom out
Zoom in
Previous page
1/18
Next page
CONNECTION AND OPERATION
GZUA 1.1600D
CONNECTION AND OPERATION
(1) Cinch-INPUT L/R These inputs are for signal cables from the source, Always use high quality RCA
type shielded cables
(2) Cinch-Output L/R for more amplifiers
(3) Power LED This GREEN LED will illuminate when the amplifier is turned “ON”
(4) Protection LED The amplifier protection circuitry will disable the amplifier if overload, short circuit
or extremely high temperature conditions are detected. When the protection mode is in operation, the LED
indicator will be illuminated, indicating the amplifier has gone into a self-protection mode
(5) Input Sensitivity Adjustemt This control adjusts the amplifier’s input sensitivity.
Input sensitivity
is variable from 200mV to 6 Volt. Clockwise increases sensitivity. Counterclockwise decreases sensitivity.
This knob is not a volume control for the amplifier. The amplifier can be driven to full power with a wide
range of signal levels. A lower signal level will require increased sensitivity for full power. A higher signal
level will require decreased sensitivity.
(6) Subsonic Filter
(7) Bass Boost
(8) Variable Low pass Filter(35 Hz-250Hz)
(9) Phase Shift Controls 0-180° Allows the optimum alignment of audio output at speakers for best
sonic imaging
(10) Remote Level Controll connection for Basslevel controll
(11) Master-Slave switch for Linkmode Ground Terminal GND Connect the GND terminal to the
chassis ground of your car and take care of the electric and mechanical contact.
(12) Ground Terminal GND Connect the GND terminal to the chassis ground of your car and take care
of the electric and mechanical contact.
(13) Remote+12Volt Wire the remote connections to the auto start lead of your Headunit
(14) +12 Volt Power Wire the amplifier directly to the car battery
(15) Speaker Terminals
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ground zero gzua 2250 x at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ground zero gzua 2250 x in the language / languages: German as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info