759343
3
Zoom out
Zoom in
Previous page
1/100
Next page
2
D
Anwendungsbereich
Betrieb ist möglich mit:
Druckspeichern
Thermisch/Hydraulisch gesteuerten
Durchlauferhitzern
Der Betrieb mit drucklosen Speichern
(offenen Warmwasserbereitern) ist nicht möglich!
Technische Daten
Betriebsdruck max 10 bar
Prüfdruck 16 bar
Hinweis:
Zur Einhaltung der Geräuschwerte nach DIN 4109
ist bei Ruhedrücken über 5 bar ein Druckminderer
einzubauen.
Für die Kombination mit Wannenfüll- und
Überlaufgarnituren ist nach EN1717 eine
zugelassene Sicherheitseinrichtung
vorgeschrieben.
Dazu ist Folgendes zu beachten:
Die GROHE Rapido SmartBox muss min. 300mm
über dem Wannenrand montiert werden, falls
eine Wannenfüll- und Überlaufgarnitur verwendet
wird, siehe Seite 1.
Sonderzubehör Best.-Nr. 14 055 anstelle des
vormontierten Stopfens (Z) verwenden.
Sicherheitseinrichtung, nur in Verbindung mit
zwei Ventilen / zwei Wege Umstellung.
Einbaumöglichkeiten, siehe Seite 19-21.
Montage in Ständerwerk
Montage mit Abstandhaltern
Montage direkt auf die Wand
Montage in die Wand
Montage auf Fertighausmontageplatten oder
Fertigzellen
Installation der Box
Löcher für die Box sowie Schlitze für die
Rohrleitungen erstellen (siehe DIN 1053).
Einbautiefe 75-105mm.
Ist die Box zu tief eingebaut kann eine
Verlängerung eingesetzt werden.
Rohrleitungen anschließen
Die hierfür vorgesehenen Abgänge sind zu nutzen.
empfohlende Konfigurationsmöglichkeiten:
- Grohtherm Smart Control siehe ab Seite 25-51.
- Smart Control Mixer siehe ab Seite 52-67.
- Single-Lever-Mixer siehe ab Seite 68-81.
- Grohtherm 2-Handle Thermostat
siehe ab Seite 82-96
Freibleibende Abgänge müssen mit den
beiliegenden Stopfen (X) abgedichtet werden.
Anschlüsse auf Dichtheit prüfen.
Stopfen (Y) müssen montiert werden, siehe
Seite 23, Abb. [6]!
Trägermaterial für Dichtmittel aufbringen, siehe
Seite 24 Abb. [9] bis [11].
Wand fertig verputzen und verfliesen.
Einbauschablone nicht vor der Fertiginstallation
kürzen.
GB
Applications
Operation is possible with:
Pressurised storage heaters
Thermally/hydraulically controlled instantaneous
water heaters
Operation with unpressurised storage heaters
(displacement water heaters) is not possible!
Technical data
Operating pressure: max. 10 bar
Test pressure 16 bar
Note:
To comply with noise levels if static pressure
exceeds 5 bar, a pressure reducing valve must be
fitted.
For the combination with bath filler and overflow
sets an approved safety device is prescribed
according to EN 1717.
The following must be observed:
The GROHE Rapido SmartBox must be
mounted at least 300 mm above the tub edge if a
bath filler and overflow set is used (see page 1).
The safety device (special accessories
prod. no.: 14 055) can be screwed in instead of
the pre-assembled plug (Z).
Safety device, only in combination with
two valves / two way diverter.
The GROHE Rapido SmartBox must be mounted
at least 300mm above the tub edge.
Installation options, see pages 19-21.
Installation in studding
Installation with spacers
Installation directly on the wall
Installation in the wall
Installation on prefabricated house assembly
plates or prefabricated shells
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grohe 35604 Rapido SmartBox at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grohe 35604 Rapido SmartBox in the language / languages: All languages as an attachment in your email.

The manual is 8,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info